N Factory V2 Version Rolex Daytona Panda: 904 Steel, 4130 Movement and More Eye-Pleasing Secondary Dials

The Rolex Daytona model is produced by Noob Factory with a solid 904L stainless steel case, standard case diameter and 7750 automatic chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

This time, we have the Cal.4130 automatic winding mechanism specific to N Factory's brand new V2 special production Daytona. The sapphire glass is 0.3 cm depressed and its thickness is the same as the original; The ceramic bezel has been revised once again! The secondary dials on the dial have been corrected because they were too thick! The chronograph pushers on the case have been upgraded! All functions work 100% completely. For the first time, a specially produced KIF shock absorber was used. The entire watch is designed based on the real Cal.4130 movement; The three-layer base plate remains faithful (1:1) to the original factory design, from the chamfer to the sun pattern. Not only does this watch outperform all replica Daytonas on the market, it is also the only replica Daytona that can compete with the original. In short, there is no need to think; It is signed by N Factory.

Dial and Hand Details

N Factory did a very good job with the movement, but it has some minor shortcomings on the dial. For example, in this Panda Daytona model, N Factory made the surrounding rings of the three small black sub-dials on the dial larger; This is a point that many watch lovers cannot accept. However, this shortcoming cannot prevent the appeal of the 4130 movement. Many watch enthusiasts buy AR Factory's dial surface or spare bezel and attach it to N Factory's watch, but the cost of this is quite high. Perhaps because it realized its own shortcomings, this time N Factory made an upgrade on the Panda Daytona model and specifically corrected the defect on the dial surface. Now let's first look at the visual and written review together; Let's see how this V2 upgraded version Panda Daytona is:

When we examine the dial enlarged, we can see that N Factory has made a significant improvement in three small secondary dials in this upgrade and corrected the problem of thick edges.

The central shaft of the hour and minute hands of the three secondary dials has become much more prominent and fuller than before.

Case and Body Workmanship

The size of the engraved inscriptions on the bezel is well done. However, when used for a long time, the inscriptions engraved on the ceramic bezel darken and turn black. This is a longstanding flaw of N Factory and it still hasn't been fully resolved.

The entire case and steel bracelet are made of 904L stainless steel; polishing, brushing and machining done on site.

The workmanship of the steel bracelet is still a bit lacking; I hope N Factory puts a little more care into rendering next time.

Strap, Buckle and Comfort

A few scratches from processing are still visible in invisible areas on the inside of the buckle.

The edge of the 904 steel buckle used to be flat cut; It has now been processed and polished and is much smoother.

Closed case back design; Inside is N Factory's brand new special production Daytona-specific Cal.4130 automatic winding mechanism. Its thickness is the same as the original, all functions work 100% completely. For the first time, a specially produced KIF shock absorber was used. The entire watch is designed based on the real Cal.4130 movement; The three-layer main plate is completely faithful to the original factory design, from the chamfer to the sun pattern.

Fine workmanship, powerful functions.

Finally, I share the lume effect.

Thanks for watching. I; I focus on watch reviews. The only reason why we work properly in watchmaking is because we are more professional in our work. We do business with honesty, tell the truth, and listen to the truth. Follow for more time information.