Where is it safer to buy the VS Factory new Seamaster 300m panda color white wavy ceramic dial watch?

The Omega Seamaster Diver 300M model is produced by VS Factory with a solid 316L stainless steel case, 42 mm diameter and Clone Caliber 8800 movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

How is the craftsmanship of the VS Factory Omega new Seamaster 300m panda color?

First, let's measure its general appearance: diameter 42 mm, thickness 13.6 mm; basically the same as the original. 316L stainless steel is used as the case material, and the glass is in imported dome form and has an anti-reflective coating; It has very high transparency and is highly resistant to abrasion. It all looks very clear when you look at it from different angles. There is no change in the outer casing form of the new and old model; The real change is in the movement and dial.

Let's talk about the dial surface first. The old Seamaster 300 meters used an enamel surface, but the new model has switched to a ceramic surface. The use of two different materials has added a stronger texture to the dial surface of the new model; Additionally, ceramics will never fade and will not get scratched. VS also used the same material, closely following the steps of the original.

The point that deserves the most praise this time is that the ceramic bezel markers and dial stick markers are still made with white enamel; There is no sign of yellowing. The horizontal wave patterns on the all-ceramic dial surface are very clear and the sense of depth is strong. The size and lume filling of the hour markers are extremely uniform, with no omissions; Only the central hole of the hour and minute hands at the central shaft position is a bit large, everything else is quite original.

Lume etkisi ışık kaynağını yeterince emdikten sonra, gece okumayı kolaylaştıran çift renkli tasarımlı bir akrep-yelkovan dolgusu ortaya çıkıyor. In other small factories, this would be a single color, which does not match the original. Its brightness is also particularly high; Personally, I think it's even brighter than the Submariner. Of course, we can tell if the lume is good by looking not only at the brightness, but also whether there is bleed at the edges; VS Factory has been very strict in this regard.

Engraved sword type large three-pointed design; The hour and minute hands are lume-filled, while the tip of the seconds hand has a red accent, making the entire dial particularly eye-catching. There are hour markers on the inside of the marking lines; Ring and stick forms were used for hour markers. However, sometimes VS Factory can have gaps in quality control; In other words, the markings at the 12 o'clock position may sometimes be seen not sitting properly. Of course I will check QC once again before shipment, so don't worry.

The date window position was at 3 o'clock in the old version; In the new Seamaster 300, it is at the 6 o'clock position. It also has the same beveled treatment as the original, the detail is spot on. As for the hour and minute hands, the hands of the new Seamaster 300 meters are made quite wide and thick; This is specifically designed to make reading easier.

Also, the minute marker lines are made in a blocky style; The distance between the blocks is the same as the original and looks quite aesthetic.

In my opinion it is a bit small compared to the original. Of course, it is very difficult to notice this when you do not compare. The protection shoulders on the right and left sides of the winding crown are polished and brushed towards the outside; It looks pretty flawless. The curve on the ear part is also very elegant.

Then there is the helium release valve at the 10 o'clock position; A non-functional screw-down crown maintains the dive watch design. The Omega logo is engraved on the crown; This logo is made very round and plump, and the size is quite accurate.

As for the strap, it uses a five-link bracelet made of 316 stainless steel, which requires very high workmanship. The bracelet is quite thick, so it feels quite heavy when worn. Of course, there is also a rubber strap version of the Seamaster 300 meters, and the feeling is quite good when worn. As for the steel bracelet, the processing is quite meticulous; polished and brushed workmanship complement each other, the sense of layering is very obvious.

It is also very easy to attach the double folding buckle. All construction details match the original, and there is also engraving on the back. Now let's look at the inside; There is an extension strap here that can be lengthened or shortened. This detail is perfectly animated. Thanks to the extension strap, adjusting the strap length is no longer a problem.

Kasa arkasına gelince, burası şeffaf kasa arkası tasarımı; The engraving on the edge of the case back is very clear and appropriate, there is also engraving and coding on the ear parts, the detail is very well done. When you look through the sapphire glass, you can clearly see the mechanism details and operation of this watch.

Regarding the movement, VS Factory uses the cal.8800 movement, which is a modified version of the Seagull 2824 movement. The original is the caliber 8800, which was developed based on the caliber 2892. If someone tells you it's their own production mechanism, you need to think a bit about that vendor. I think the main reason for using this mechanism is the balance wheel issue. In VS's own production 8500 movement, the balance wheel position is at the 6 o'clock position, while the balance wheel position of the 8800 is at the 12 o'clock position; The original is also like this, but the VS Factory balance wheel position is slightly shifted to the left. So it is not its own production mechanism.

However, this 2824-converted 8800 movement is generally quite good in all aspects in terms of performance; The balance wheel is also coated in black. This 2824 movement was used to avoid embarrassment when it turned out to be a fake at a glance; Thus, the balance wheel position has almost the same effect as the original. It's quite beautiful. Now let's feel the aesthetics offered by the mechanism once again.

Finally, let me summarize: Thanks to the above detailed review, we clearly understood that the VS Factory Seamaster 300 does not use a replica integrated movement like the Seamaster 150 and Seamaster 600; Still, the 8800 movement, converted from the 2824, is the most powerful version in the industry. No version right now can compete with this. Ceramic material was used especially on the bezel and dial surface; This completely eliminates the risk of fading and the watch can be worn for a long time. In fact, many Seamaster 300 meter parts can now be used by replacing them with the original ones.

We've come this far; I hope this article helped you. I will share more detailed disassembly, real shot review and real-replica comparison in the future.