VS Factory Rolex Oyster Perpetual 41 Review: 100th Anniversary Gold Bezel and Dandong 3230
VS Factory Rolex Oyster Perpetual 41 100th Anniversary Edition Super Clone; With its yellow gold flat bezel, green accented slate gray sunray dial, embossed 100 YEARS engraving at 6 o'clock and integrated Dandong 3230 super clone movement, it represents the most ambitious replica interpretation of the Oyster Perpetual series to date.
The Oyster Perpetual is one of the toughest tests in the replica world because of its design simplicity; There are no distractions such as a bezel flute, chronograph counter or date window. All that remains is the dial surface, case proportions and bracelet finish. If a factory leaves even the slightest deviation on these three surfaces, the watch will give it away in the first second it is worn on the wrist. The 100th anniversary edition adds the gold element to the series for the first time, making this exam even more difficult.
In the version introduced this year, VS Factory aimed to carry out the gold tone in a single temperature throughout the bezel, crown, hour-minute hands and index bezels. The color scheme, in which gray and green are used together on the dial, has gained a three-dimensional surface depth with the oil pressure technique. So we put the watch side by side with the Rolex reference and examined it under seven headings: we measured every contact point, from the dial pressure to the feeling of winding the movement, from the caseback groove to the factory codes inside the buckle.
| Teknik Parametre | Orijinal Rolex Oyster Perpetual 41 (100. Yıl Sürümü) | VS Factory Super Clone | Piyasa İşi Sıradan Replika |
|---|---|---|---|
| Kasa Çapı & Malzeme | 41 mm nominal / 904L paslanmaz çelik | 41 mm nominal, ~38,9 mm köşegen ölçü / 904L çelik | Kalın ve şişkin kasa, düşük kalite çelik |
| Bezel | Sarı altın düz, tam polisaj halka | Sarı altın tonlu düz halka, aynasal polisaj | Bakıra kaçan sarı kaplama, portakal kabuğu doku |
| Kadran | Arduvaz gri güneş ışını, yeşil aksanlar | İnce tanecikli güneş ışını doku, yeşil çerçeve ve yazı | Kaba ışın çizgileri, sapmalı yeşil ton |
| Kadran Baskısı | Kabartma etkili yağ baskı | Yağ baskı, üç boyutlu harf kabartması (Birebir) | Düz serigrafi, kenarları taşan harfler |
| 100 YEARS Gravürü | Saat 6 hizasında kabartmalı | Keskin kenarlı, eşit yükseklikte kabartma | Sığ baskı ya da tamamen eksik |
| Akrep-Yelkovan Merkezi | Masif göbek, altın çerçeveli kollar | Masif göbek, aynı altın tonu (Birebir) | İçi boş göbek, merkezde oynama |
| Mekanizma | Cal. 3230, ara tepe konumu yok | Entegre Dandong 3230, ara tepe konumu yok | Sahte plakalı standart otomatik, boşta tarih çarkı |
| Kurma Tepesi | Vidalı Twinlock, kabartmalı taç ve '100' rakamı | Vidalı Twinlock, dolgun kabartma ve '100' rakamı | Sığ logo, dişlerde boşta dönme |
| Toka & Kodlar | Oysterclasp, derin iç gravürler | Masif bıçaklar, derin kazıma, 989 fabrika kodu | İnce sac toka, sığ lazer izi |
1. Yellow Gold Flat Bezel and the First Gold Color Set of the Series
Rolex The most defining feature of this reference is that it is the first version in the Oyster Perpetual family to use the gold element. The gold tone doesn't just stay on the bezel; The crown, hour and minute hands, and index bezels are executed in the same warm tone. This is exactly the critical threshold in the replica: when the plating tone shifts to yellow on the bezel and another on the hands, the watch looks messy no matter which angle it is viewed from. In the VS Factory version, the gold tone in four separate tracks is settled into a single reference.
- The polishing quality of the flat bezel is also a separate test item. In a smooth, fully polished ring, the slightest orange peel texture or ripple stands out directly. In the product tested, the ring surface has a continuous mirror finish; No gap or step difference that would leak light was detected on the line where the bezel sits on the case. In commercially available replicas, this area is usually covered with a predominantly yellow, copper-coated coating and loses its tone in a short time.
2. Slate Gray Sunray Dial with Green Accents and 100 YEARS Engraving
The dial features a slate gray sunburst texture, collecting light with a smooth transition towards the centre. The texture grain is fine and regular; There are no rough ray lines or center-centered smearing seen on cheaper clones. The second leg of the color scheme is green: the thin green frames on the index edges and the green tone of the dial inscriptions, together with the gray background, establish the identity of the model. Since the printing is applied using the oil pressure method, the letters give a distinct relief feeling on the surface.
- The signature of the series: is the embossed 100 YEARS engraving located just below the double bar index at 6 o'clock. The letter heights of the engraving are equal, the edge lines are sharp, and they seem to be fused to the dial surface; There are no sticking marks or shadow leakage. The center hubs of the hour, minute and second hand are made of solid solid material. This detail is a distinction that is almost never encountered in ordinary replicas, preventing the hands from moving in the center at high angles and breaking the shadow falling on the dial.
3. Integrated Dandong 3230 Movement, Power Reserve and Winding Feel
At the heart of the edition is the latest version of the Dandong 3230 super clone caliber. The bridge engravings, wheel layout and automatic winding assembly are consistent with the original architecture; The balance oscillates freely and there is no unnecessary decorative cover plate on the caliber. Since the Oyster Perpetual is a dateless model, there is no fake date spacer or freewheeling date wheel in the caliber; This structural inconsistency, which is common in ordinary replicas, has completely disappeared in this product.
- The most striking point in practical use is the working logic of the crown: there is no intermediate crown position in the caliber. After removing the crown, winding is done by turning it directly upwards, and when it is pulled out one step, it is turned downwards to bring the clock forward. The feel during winding is full and smooth, with no backlash or gear skipping felt. The factory states that this latest version has achieved a significant improvement in terms of power reserve and operating stability; The release pattern in laboratory testing supported this claim.
4. 41 mm Case Geometry, Side Profile and Screw-Down Twinlock Crown
The official diameter of the model is 41 mm; However, when measured diagonally over the dial opening, the value is around 38.9 mm. This is a result that is also encountered in the original product and shows that the replica captures the measurement in real geometry, not on paper. The case profile is machined from solid 904L steel, and the chamfer lines where the satin and polished surfaces meet are left as a single uninterrupted line. When worn on the wrist, the silhouette remains slim and balanced as in the original.
- Screw-down Twinlock crown: It is one of the most successful micro details of the version with its embossed crown logo. The layers of the relief are clear and the edges are clean. On the side of the hill is the number 100, marking the 100th anniversary; The three-dimensional depth of this figure is full and legible. The screwing movement fits the threads perfectly from the first turn, and there is no strain or idle rotation. Waterproof performance is also at a safe level for daily use thanks to this crown-seal integrity.
5. Solid Back Cover, Slot Geometry and Engraving Between Case Lugs
The back cover is made of circular satin brushed solid steel and the groove geometry on its outer wall is fully compatible with the original release keys. This detail is not only aesthetic: when the slot angle and the distance between the teeth are deviated, the factory key will not fit into the cover and the cover edge will be crushed during the first service. In the tested product, the key grip is problem-free, the cover sits properly on the gasket seat and there is no step difference between the case and the cover after tightening.
6. Oysterclasp Buckle Internal Engravings and 989 Factory Security Code
At the bottom of the bracelet, in an area where the wearer barely looks, there is a 100 YEARS sign marking the 100th anniversary. This is exactly the region that cost-cutting factories sacrifice first; VS Factory processed this invisible area with deep laser engraving. The Rolex logos inside the buckle are not sharp-edged and scattered, the engraving depth gives the impression of a real engraving, not a superficial scratch. The 989 factory security code used in current production has also been placed with the same care.
- The buckle body consists of solid steel blades: it does not stretch or warp under pressure, the folded wings close parallel to each other. In commercially available replicas, this area is mostly pressed from thin sheet metal, the engravings are left as a shallow laser mark, and the edges begin to open even with short-term use. In the comparative examination, the difference between the two approaches is directly felt not only in the appearance, but also in the weight taken while holding the buckle, surface temperature and closing toughness. The satin brushing direction on the buckle surface continues uninterruptedly with the bracelet links.
7. Oyster Bracelet Brushing Texture, Lock Feel and Wrist Stance
The brushing texture of the Oyster bracelet is applied unidirectionally and in equal depth on the upper surface of the links; The side chamfers are separated by polishing. The border line between the two tissues moves along the pod without slipping. The feel of the buckle cover when opening and closing is solid and one-step; The lock clicks with a clear sound when pressed on the cover with the embossed crown logo and does not tend to loosen with repeated attempts. On the wrist, the bracelet falls in a natural curve without looking rigid.
General Evaluation
Saat Dedektifi Lab Score: 9.6 / 10. Oyster Perpetual is the clear test in replica production as it has no complex functions to hide; success is measured solely by the dial surface, case proportions and finish quality. VS Factory passed this test with high marks by executing the gold element in a single tone in four separate pieces in its 100th anniversary edition, transforming the gray-green dial setup into a three-dimensional surface with oil printing, and installing the current Dandong 3230 caliber without an intermediate crown position.
Saat Dedektifi Expert Score
Model: Rolex Oyster Perpetual 41 100 Years Super Clone · VS Factory Super Clone (A+)User Rating
41 people rated · Saat Dedektifi Verified Score
Rate this model:
Conclusion & Detective Verdict
Saat Dedektifi Lab Score: 9.6 / 10
The reason the score does not rise to the full ten is that the long-term corrosion behavior of the gold plating has not yet been verified with field data; All measurement and finish items match the original. For users who are looking for a simple Rolex, but want the 100th anniversary gold detail and 100 YEARS engraving in its original look, this version is clearly ahead of the alternatives on the market.
Frequently Asked Questions (FAQ)
Is the gold tone the same on the bezel, crown and hands on the VS Factory Oyster Perpetual 41 edition?
Yes; The gold-tone bezel, screw-down Twinlock crown, hour-minute hands and index are placed in a single reference along the bezels. Yellow leakage, which is common in cheap replicas and varies from piece to piece, was not detected in this product.
Is the case really 41 mm, why does the measurement come out as 38.9 mm?
Resmi çap 41 mm'dir; The 38.9 mm value is the diagonal measurement taken over the dial aperture. Since the same result is obtained with the original product, this is not a smallness problem but an indicator of measurement consistency.
How is winding done in the Dandong 3230 movement?
Kalibrede ara tepe konumu bulunmaz. After removing the top, it is installed by turning it upwards; When it is pulled out one step and turned downwards, the clock is moved forward. The winding and adjustment feeling is solid, gap-free and smooth.
Toka içindeki 989 kodu ne anlama geliyor?
989 is the factory security code used in the current production batch and is processed by deep laser engraving. Bileziğin altındaki '100 YEARS' With the sign, it indicates that the same production discipline is maintained in invisible areas.
