VS Factory Rolex Cola bezel real-replica comparison

The Rolex Wristwatch model is produced by VS Factory with a high-tech ceramic case, standard case diameter and high-precision automatic Super Clone mechanism architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Case and Body Workmanship

The Cola bezel that VS introduced this time required really great effort to achieve exactly the same result as the original. The ceramic powder formula was baked and combined through many processes. First, a single piece ceramic raw body was obtained by firing at 1000 degrees, then the liquid solution was added and the first sintering was done at a high temperature of 1600 degrees; however, at this stage the bezel was still quite crude. Then, with the second sintering, the bezel reached approximately its standard size and was processed again, resulting in today's V3 bezel. The font used platinum PVD; It does not darken or turn yellow and gives exactly the same result as the original.

As for the details, VS has stepped up in every way here too. With its Dandong 3285 movement, it surpasses all versions on the market in various details.
1. VS comes with the most powerful Dandong 3285 GMT reverse quick-set calendar.
2. The VS Factory V3 bezel appears red throughout the bezel under ultraviolet light, the same as the original.
3. The VS Factory Cola bezel has the same high transmittance windshield as the original; The reflection refraction from four directions is not obvious, clear and clear. Its reflection is high and its permeability is not as bad as in the market versions.
4. VS's calendar magnifier ratio is the closest on the market; The coating is in the same white-pink tone as the original. Its proportions are large and its coating is not the type that gives off blue light, unlike the ones on the market.
5. The size of the VS Factory Cola bezel teeth is the same as the original; Unlike the ones on the market, the teeth are made large and not inappropriate for the model.
6. The VS Factory Cola bezel leaves a gap of 0.25 millimeters after the screw-down crown is locked, the same as the original; This is to reduce friction between the crown and the case. It does not sit directly on the bottom and corrode the case like in the market.
7. The VS Factory Cola bezel minute hand is the most pointed, and the seconds hand is straight and sharp, the same as the original. The versions on the market are skewed and the needle is very blunt. The GMT hand is bright red on the VS, the same as the original, while it is dark red on the market.
8. The VS Factory Cola bezel thickness is 12.1mm, the same as the original; The version on the market is 12.5 mm, which is 0.4 mm thicker than the original!
See the comparison photos for more details! A mold was taken from the original; It's the details that determine quality!