Can the VS Factory Rolex white gold Daytona v3 edition beat the Clean with its Dandong 4131 movement and 184 g weight?

The Rolex Daytona 4131 model is produced by Clean Factory with a solid stainless steel case, standard case diameter and 7750 automatic chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

One: Appearance upgrade — hour markers are more elegant on the new model
Let me talk about the most noticeable change first. The hour markers on the new gray Daytona have been changed; It is thinner and longer than the old model, and looks visually more elegant. The old model's markings were relatively short and thick, and its style was more stern. Experts notice this change in detail at a glance. Minor revisions have also been made to the design of the three small dials; The layout is more harmonious, the radial patterns are fine and smoothly processed. When you rotate it under the light, a subtle shine play occurs on the dial surface; it's not that dull solid color, it's just full of texture.

The entire weight of this watch has now been increased to 184 grams; The complete watch has been increased to 184 grams, the weight is quite sufficient and it feels full in the hand. The original is approximately 210 grams; There is still a difference between them and the original. However, this product from the VS factory is currently the top version on the market; It's a pretty good version.

Dial and Hand Details

Two: Dial details — the tone of the gray dial is just right
The spirit of the gray Daytona is hidden in the dial color. The gray dial of some replica watches on the market turns either blue or brown; When placed side by side with the original, the color difference is clearly visible. But VS Factory has adjusted this gray tone very accurately; With the matte texture and finely processed surface, there is almost no visible color difference. The printing is also very solid; The red "DAYTONA" lettering is solid and three-dimensional, and does not fade or bleed. The edge cutting of the hour marker sticks is clean, no burr can be felt when touched, and its three-dimensionality is strong. The hour and minute hands have a full internal axis design; Its rotation is smooth, it does not get stuck, the cutting workmanship is on point. Great factory quality is visible to the naked eye.

There is one detail to note: the crown logo at position 12 is aligned extremely precisely; Internal engravings, codes, everything that should be there is present. This is not just a printed matter. These small places are often the points that best reveal the quality of workmanship.

Let's look at the general detail workmanship — This dial detail workmanship from VS factory. In this gray Daytona from VS, the dial color tone is very well adjusted, the color is quite accurate. The radial pattern on the three small dials is also very finely crafted, and the print is quite three-dimensional; The neat, embossed font is also extremely beautiful. These hands on the hour and minute hands are also very well cut; great factory workmanship, no burrs or roughness, plus a solid inner axis; This solid inner axis is very well made. Then position 12 is aligned with the crown; This is also true, quite accurate. The logo at position 12 is also correct, very neat. Those internal engraved writings inside are the codes that should exist; All completely engraved.

Case and Body Workmanship

Three: Case and bezel — the plating work is bright and fine enough
The bezel is made of steel material and electroplated polishing work; It is full of shine, it is not that cheap job "screechy shiny", it has a soft metal texture. Scraping part processed relatively thick and strong; The font is clear, the edges are clean, there is no blurring or missingness.
The general line of the case is extremely compatible with the original; The lines are fluent, the curve of the ears is smoothly processed; It fits on the wrist when worn and does not feel sharp. At this point many small factories are not good enough; Either the corners are too sharp or the curve is wrong, it hurts you when you wear it for a long time.

The bezel is also made of steel, then electroplated; The electroplating polish work is also very bright. These engravings are also relatively thick engraved, in general all engravings are quite thickly engraved. On the case side, it is very similar to the original, and the entire case form is extremely good.

Four: Weight design — balancing the entire watch is the real conscientious task
As for the weight; This is one of the main problems with Daytona replicas. The weight of the original white gold Daytona is approximately 210 grams; That heavy, full feeling when you put it on the wrist is the "high-end feeling" that many watch enthusiasts pursue.
Some small factories in the market only add the weight to the case part, the strap still remains light; When you put it on, the head becomes heavy and the feet feel light, and the hand feeling is lost. But VS Factory acted very conscientiously this time; Weight work was done on the complete watch (case and strap together), the total weight reached approximately 184 grams.

Although there is still a difference between the original's 210 grams, this weight is now enough to make it feel "full" in the hand; The weight feeling and texture are both good for daily use. In my testing, just in terms of hand feel, it's basically inconclusive unless you compare it closely.

Strap, Buckle and Comfort

VS factory has fully weighted the case and strap, they are all balanced. Some small factories only weight the case part and do not weight the belt. VS, on the other hand, has weighted the complete watch. Also, all the necessary engravings are present, such as those engravings on the back, the AU750 dog head stamp and the crown markings.

Five: Buckle and accessories — no negligence in detail work
VS Factory also spent effort on the buckle part. The overall workmanship is solid, opening and closing is smooth; There is no feeling of snagging or looseness. The engravings inside are complete; Everything is there, such as code, dog head stamp, AU750 mark, font is clear, edges are processed smooth.

If you buy such an accessory set separately, there are several hundred on the market; The fact that the factory is willing to spend money on accessories shows that it cares about overall quality control.

A little reminder: Nowadays, the buckle codes of replica watches change frequently; It is not realistic to try to understand which factory it is by looking at the code. But details such as the hand feel of the buckle, its workmanship, and the opening and closing experience do not mislead people. VS Factory is actually more generous in its investment in accessories than smaller factories.

Movement and Caliber Performance

Movement: Dandong 4131, the pinnacle of Daytona replicas. There is nothing to hesitate about the mechanism; Dandong 4131 is currently the top trim of the Daytona replica field. VS Factory always insists on using the Dandong movement, there is nothing to say about it.
It has three main advantages: Power reserve: Approximately 70 hours; You don't have to worry about the watch stopping even if you don't wear it for two days in daily use.
Stability: The return to service rate is low, time deviation is kept at an excellent level among replica watches.
Function compatibility: Chronograph start, stop and reset are precise; The stop function in time setting is the same as the original.
It is very simple to use: Turning the crown upwards winds it, pulling it one step adjusts the time; When you turn it forward it goes forward, when you turn it back it goes backwards. After loosening the safety from the three buttons on the top right, the two buttons on the top start and stop the chronograph, and the one on the bottom right resets it.
A critical detail: While pulling the large crown and setting the time, the chronograph minute hand stops. This is the same as the original; But if it is an old 7750 or a deck mechanism, the chronograph minute hand rotates constantly and does not stop. This small detail is often the point that best distinguishes the quality class of the movement.
Pros: The gray dial color tone is accurate, it is close to the original, the matte texture is thin.
The complete watch weight is 184 grams, it feels full in the hand, the usage experience is good.
Dandong 4131 mechanism, 70 hours of power, stable and durable.
The dial details are solid; There are no flaws in the hour-minute hands, hour markers and printing.
The buckle workmanship is exquisite, the engravings are clear, opening and closing is smooth.
VS Factory quality control is stable, the investment in the accessories is sufficient, it does not neglect the details.
Cons: 184 grams of weight is still different from the original's 210 grams.
The price may be a little high compared to other factories.
Water resistance is limited, you can take a hot water shower by wearing it. is not recommended.
A replica is a replica after all; It is necessary to accept this psychologically.

Purchase recommendation: Who is it suitable for?
If you particularly like the gray Daytona color but find the tens of thousands of lira price of the original too high, this V3 version from VS Factory is really worth considering. It is not a low-end product that can be seen as a fake at a glance; It is basically ineffective in daily use, business and casual environments.

Especially the combination of the complete weighting design and the Dandong 4131 movement is currently considered the highest level equipment among Daytona replicas. Although there is still a slight difference in weight, when the appearance, mechanism and detail work are evaluated together, it truly deserves the title of "top replica".

General Evaluation and Conclusion

In general, the assembly of this watch is weighted; It feels fuller in the hand when you put it on the wrist, it's a pretty good version. This watch is really well made; Both the workmanship and the mechanism of the VS factory are very good in every aspect, quite high-end.
If you are looking for high original similarity and high stability, but do not want to spend big money on the original, the VS Factory white gold gray Daytona V3 version is one of the best options on the market now. In the future, if your budget allows, you can also follow the upgrade news of other colors; After all, Daytona has so many color options that there is sure to be one that suits you.

I hope this article helps you. I will share more detailed disassembly, real shot review and real-replica comparison in the coming days.