VS Factory Rolex 41 Datejust V2 mint green color, Dandong 3235 movement — is it worth buying?

The Rolex Datejust model is produced by VS Factory with a solid 904L stainless steel case, 41 mm diameter and Dandong 3235 Clone movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

As the popularity increases, replica factories naturally do not miss this opportunity. There are not a few factories on the market that make Datejust, but VS Factory is one of the prominent ones. The model we will talk about today is the mint green Datejust V2 version released by VS Factory. It is said that improvements have been made in many points this time; Today I will share my real impressions with you.

What is the most fearful thing when buying a replica watch? The biggest fear is that the factory will cut back on materials. VS Factory did not skimp much on the basic hardware of this V2 version. The 41 mm measurement matches the original exactly, and this measurement is frankly quite clever — it does not look small on those with thick wrists, nor does it look exaggerated on those with thin wrists; It doesn't seem odd at all when it comes to work on a daily basis. For all these years Datejust, 41 mm is truly the most classic gold gauge.

Case and Body Workmanship

On the material side, 904L stainless steel is used, not that cheap 316L steel. What is the difference between these two steels? In short, 904L is more corrosion resistant and its gloss is better; Of course the cost is higher. The total weight of the watch is approximately 133 grams. I compared it with the original, there is almost no difference in weight. That feeling of plump, solid weight in your hand is so realistic; It's light and doesn't feel cheap. This feature alone surpasses many small factory versions.

The serrated bezel is the soul of the Datejust and is where the most problems occur in older versions. Previously, in some versions, the serrated bezel's shine would be uneven and its color would fade after wearing it for a long time; It was quite annoying.

This time, VS Factory worked especially on the serrated bezel in the V2 version and used a multi-layer white gold plating process. I examined it carefully; The edge angles of the bezel are processed very smoothly, each tooth is three-dimensional and smooth, there is no crooked feeling. When viewed under light, the reflection is very even; that clear metal shine is almost indistinguishable from the original white gold bezel.

Glass and Sapphire Crystal

High clarity sapphire glass was used as glass; Mohs hardness is high enough, it does not get scratched easily in daily impacts. Light transmittance is also very good, the dial looks very clear, there is no distortion.

The hidden small crown security emblem at position six is ​​also faithfully reproduced; Can be seen clearly in strong light. The shadow engraving on the inner edge is also very clear, with no blurring or warping. Although these small details are inconspicuous, they reveal that the factory really cares for watch lovers looking for perfection.

Dial and Hand Details

Mint green dial: this time the color tone has finally been achieved
Frankly, this color is exactly what the mint green Datejust buyers are after. If the color is not right, the rest is in vain, no matter how well done.

The font and hour markers on the dial are very clear; High temperature oil printing process is used, the marks are three-dimensional and full, with no burrs or ink overflow. The classic three hour and minute hands design is very smooth and the lume filling is full; Night time reading is very clear. Its overall simple and flashy style is exactly the same as the original.

The dial of this V2 version from VS Factory was reportedly finalized after dozens of color tests. When you really look at it, that screeching bright green is not there; The fresh and soft mint green tone of the original has been captured. When the light is weak, a warm light green appears; when the light is strong, a slight radial texture appears faintly; The layer feeling is very full. Compared to the old version, this time's color tone has made great progress. It looks both fresh and high-end on the wrist, there is no feeling of color difference.

The polishing and plating work of the case is also well done; It's slippery to the touch, you can't find any burrs. The metal shine is captured very well, it does not look dull and dull.

Case details and watch setting feel
The processing of the side surface of the case is also on point; The joints are tight and smooth, there is no excessive gap problem. On the right side there is a recessed crown; The crown logo and writings on it are clearly engraved. When adjusting the watch, the damping feeling is moderate, neither loose nor sticking; It's very smooth to use, it doesn't have that cheap mechanical feeling. This is very important; Many replica watches strike exactly at the feeling of time setting.

Movement and Caliber Performance

The watch has a closed case back design, the internal mechanism is not visible; But the real competitiveness of this V2 version is in its mechanism. This mint green Datejust V2 version from VS Factory is equipped with the Dandong 3235 integrated movement; This is currently the most stable 3235 movement version in the replica world.

Why do we say mechanism is important? Because whether the mechanism is good or not directly determines whether you will be comfortable while wearing it and whether your mind will be at ease.

This Dandong 3235 movement is manufactured to the exact same size as the original 3235 movement; It has a double mainspring box design and its power reserve can exceed 70 hours. I tested it myself; I didn't wear it for two days over the weekend, it was still working perfectly when I picked it up on Monday morning, no need to make frequent adjustments. More than enough for commuters.

The calendar jump and quick time setting function are exactly the same as the original; The second hand can stop simultaneously while making adjustments, and its operating logic is no different from the original. The engravings and balance structure on the mechanism bridge are also made in accordance with the original; There are no major flaws in the details.

This is the key to why the VS Factory V2 version crushes the versions at the same level.

Strap, Buckle and Comfort

Five-bead bracelet: suit comfort is key
The bracelet continues the classic five-bead design of the Datejust; polished in the middle and brushed on both sides. The combination of double processing makes the texture feeling richer. The spaces between the links of the bracelet are equal, the movement is flexible; It fits the wrist very well when worn, and its comfort is very high.

The workmanship of the buckle was not neglected either; The text and logo on it are clearly engraved, opening and closing is smooth, the lock is tight, it cannot be opened easily; Peace of mind in daily use. The overall team experience is almost indistinguishable from the original.

Every detail, from the 904L stainless steel material to the 41 mm gold gauge, to the multi-layer white gold plating of the serrated bezel, and from there to the accurate color tone of the mint green dial, is captured in its place. The stable performance of the Dandong 3235 movement puts the mind at ease; It has almost no obvious weak points.

If you really want to buy a Rolex mint green Datejust, but find the price difference of the original too high, this V2 version from VS Factory is definitely the first choice. Both the workmanship details and the stability of the mechanism are on point; It is a model that can be bought blindly and does not lead to traps. You don't have to deal with the gaps in the details after purchasing it; The moment you put it on your wrist, it feels completely top-notch. I hope this article will be useful to you. We will share more detailed teardowns, real shot reviews and real-replica comparisons in the coming days.