How is the craftsmanship of the VS Factory Omega 2025 new Seamaster 300m gold green dial?

The Omega Seamaster Diver 300M model is produced by VS Factory with a high-tech ceramic case, standard case diameter and ETA 2824-2 caliber in Swiss norms architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

General Evaluation and Conclusion

I have always recommended the Seamaster 300 produced by VS Factory. There are many color options; There are over ten, almost 20 different colors available. All are highly recommended, including the 007 models. The main reason for this is that its mechanism is extremely stable. The dial color consistency and quality control details are truly top-notch. Other factories on the market really can't match VS Factory.

Dial and Hand Details

VS Factory also performs admirably in dial details. The wave-patterned ceramic dial is both scratch and abrasion resistant, and a "step" effect is achieved in the date window with the three-dimensional printing technique; In this way, the date numbers are more centered and gain a more three-dimensional appearance. Each lume filling is full and homogeneous; You can read the time clearly whether it is day or night. The hour and minute hands are produced with gold-plated workmanship and match the gold case, further increasing the integrity of the overall.

Case and Body Workmanship

The bezel is made of high quality ceramic material and enamelled; Its texture is thin and its durability is extremely good. The design of the lume dot continues the embossed style of the original and is covered with a clear glass protection layer; Thus, wear and tear problems that may occur in daily use are prevented. This detail workmanship fully demonstrates VS Factory's uncompromising commitment to quality.

This is exactly the quality control. Let's look at the bezel first; The bezel is also ceramic and green in color. The bezel is also made with this enamel workmanship. The lume dot is embossed like other classic 300 models. Above this lume spot in the middle is a layer of glass; So you don't have to worry about the lume point dropping or similar problems.

As for the dial, the wave pattern is also in this ceramic structure and the quality control is really solid. A level has also been made in the date window, and the date is fairly centered. However, the date was processed with printing technique; When you enlarge it and look at it from the side, it looks slightly three-dimensional. So it's not just a plain print, it's a three-dimensional ink print. The lume fill and all these lume areas are very full and very homogeneous; You don't have to worry about overflow or similar problems. The hour and minute hands are made in this gold color.

This color combination still does not suit everyone, it varies depending on the person wearing it. Because this color seems a little strange; green and gold case on top. In fact, most people worry about the gold case whether its color will fade when worn for a long time. But it has been a few years since VS Factory released this model, and some other gold-colored models have not experienced any color fading. Of course, it is normal for it to darken after wearing it for a year or two. Even 18K gold becomes a little darker when you wear it for a long time, and it is not as bright as when it was new; But this does not count as discoloration. Because the gold plating workmanship of the VS Factory factory is really successful, so you do not have to worry about the color fading or similar.

Movement and Caliber Performance

The open-back movement is a modified bridge movement from the 2824. The engraved inscriptions on the bridges of the movement are also really well crafted. These writings were first carved and then printed. JVS and other versions have only printing, no engraving; Here it is carved and processed. That's why each print looks extremely clear.

VS Factory has installed a 2824-based, modified bridge movement in this Seamaster 300 model; Its performance is stable and easy to maintain. The carving on the bridge is marvelous; Each character is first deeply carved and then printed. Its clarity is far beyond the workmanship of other factories on the market that rely only on pressure. Additionally, a double T shock absorber and small screw design have been added to the mechanism; This further increased its impact resistance and stability.

Strap, Buckle and Comfort

The strap is made of these rubber straps, extremely soft; The buckle is also gold. As for the others, I would still recommend VS for this blue Seamaster 300. No matter what color, just select VS directly. On Seamaster 150, Seamaster 300, Seamaster 600 you can all choose VS directly; You can basically beat other factories, you don't need to look at them.

I hope Tayfun's article was useful to you. I will share more detailed disassembly, real shot review and real-replica comparison in the future.