How does the OR Factory Seamaster 300 (white dial) watch compare to the VS Factory

Comprehensive comparative analysis of Or Factory Seamaster 300 White Dial Watch and How Does It Compare to Factory models: Case finishes, movement precision, dial details and production tolerances are examined in detail with Saat Detective expertise standards.

You don't have to think about color in clothing combinations; Ultimately, whether it is black or white, they are both colors that go well with everything. Although it is not as striking as blue, the visual feeling brought by the meeting of black and white is still perfect!

The best recycled version on the market today is definitely the OR Factory production. Frankly, even VS Factory could compete head-to-head with OR Factory if it were released now. If you are interested, let's take a closer look together!

How is the Seamaster 300 replica with a white dial?

The size is exactly the same as the original, 42 mm, which suits Asian users very well. This size for men is a really comfortable and portable size! 316L stainless steel is used as material!

At the transition point from the front to the side of the case, the curve workmanship of OR Factory production is closer to the original compared to VS Factory! The recovery of the curve design in the ear area of ​​the case is also very finely processed. The ear arch design is made to fit perfectly on the wrist, its lines are clear and the comfort when worn is really good; In particular, the fit of the case and the strap is much tighter.

The four footprint codes on the case back are exactly the same as the original. There is not the slightest feeling of sloppiness, it is very well made. Especially in that world emblem area, VS Factory production is almost fused as one piece, while it is very difficult to see the difference in OR Factory recovery! OR Factory production will be better than VS Factory production in case recovery!

The white dial is made of high-density ceramic material. Ceramic dial production requires a high level of workmanship; After all, the waste rate is not low at all! The wave pattern on the dial has been processed with laser engraving technique to get closer to the original!

The engraved hour and minute hands are coated with white Super-LumiNova lume coating, and the processing quality of the hour and minute hands is also very superior; whether it is general polishing or edge work. The workmanship of the hour and minute hands can be seen, they are extremely finely processed. The nail-shaped hour markers and hour and minute hands are filled with lume powder, making it easier to read at night. The curve and indentations of the Omega logo are also very well done.

In order to achieve a high standard, white enamel workmanship was used in the processing of the hour markers on the ceramic bezel and there are no signs of yellowing. The visual effect when combined with the ceramic white dial is really successful!

Thanks to the transparent case back design, you can watch the balance wheel and mainspring working through that sapphire glass surface. Integrated replica version 8800 movement, full of mechanical feeling!

Many reviews miss the engravings on the edge of the case back! Some readers almost always ask me why I don't mention the case back engravings; Let me explain why here. In fact, this is because case back engravings are not difficult at all for these large factories!

This is exactly why most people do not talk about how the engraving on the case back is, they skip the comparison directly; It's not much of a focal point anyway. The majority of people look at the movement first, and you cannot find anything to criticize in the case back engraving recovery of every large factory! So the market gradually got used to ignoring and skipping this issue!

Now let's talk about the mechanism of this watch; It carries the integrated 8800 automatic installation mechanism of OR Factory production. Automatic winding actually means that by shaking the wrist while the watch is worn, it can convert kinetic energy into winding the movement! The mechanism is installed in one direction, the rotor rotates flexibly; The disadvantage is that its sound is a little louder than the VS Factory production, but its stability is better compared to the VS Factory production.

The strap of this OR Factory production Omega Seamaster 300M ceramic bezel white dial replica watch is another point that surpasses the VS Factory production. Some versions on the market still use the Seamaster 300's existing strap. The appearance of that strap is faulty, there are burrs on the strap logo, the shiny edge of the buckle is too big. But when you go into detail, it doesn't hold up; On the other hand, it reduces the cost greatly, there is no need to undertake the investment and mold design expense of the original purchase. OR Factory production naturally started from the belt in order to beat VS Factory production! It is much more finely machined than the VS Factory production; In particular, each link of the steel bracelet is hand-machined. This is the first production on the market that allows the back side of the steel bracelet to be chamfered exactly the same as the original, and it can be replaced with the original. The touch of the rubber strap is smooth and full, and the spring pins can be used in common with the steel bracelet.