Rolex

Color Comparison of v2 and v2s Versions on Clean Rolex GMT Cola Bezel

@Rolex · 23 Kasım 2023

Rolex Clean Factory İncelemesi - Ön Görünüm ve Kasa Tasarımı

The Rolex Wristwatch model is produced by Clean Factory with a solid stainless steel case, standard case diameter and Shanghai 3285 GMT movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Below is v2 on the left, v2s on the right.

Let's keep it short, let's summarize first; see further for details.

This time the bezel has been updated into two versions: v2 and v2s.
in v2, the color is more accurate, but its brightness under ultraviolet light is slightly lower;
in v2s, the color is slightly weaker and there is a noticeable grained texture in the filling of the hour markers, but its brightness is higher under ultraviolet light;
clean keeps both versions on sale; The price of the v2 version is the same as the cv1, while the v2s is XXX more expensive;
only the v2s version bezel is available on the c+ side, its price is XXX more expensive than the c+ v1 version;
what is noteworthy is that the price of the c+ v2s version is still cheaper than the cv2;
consult for detailed prices.
Other aspects of the two are similar; clean uses the real molded Danxdong 3285 movement with a 70-hour power reserve, while the Shanghai 3285 on the c+ side only has a 40+ hour power reserve.

Clean Rolex GMT Kola Bezelinde v2 ile v2s Versiyonlarının Renk Karşılaştırması - Kadran Detayı ve Bezel İşçiliği

First of all, the highlight of this upgrade is the color improvement on the wrist bezel. You may think of the red-blue dual color of the Clean cola bezel; But the real challenge is to get the red part right. Coke bezels in the replica market have now reached a mature stage. According to the habit of other manufacturers, once the sales increase, they do not concern themselves with the upgrade and improvement of that replica watch again. But Clean is different; In my opinion, it is one of the most craftsman-spirited watch manufacturers of today. The cola bezels are already almost perfect to the original, however, they are continuing their research for a version even closer to the original. That's why we will provide you with analysis and recommendations for versions such as V1, VS, V2s.

Clean Rolex GMT Kola Bezelinde v2 ile v2s Versiyonlarının Renk Karşılaştırması - Kasa Profili ve Kurma Kolu İncelemesi

First, let's look at the workmanship on the bezel of the V2 version with Clean starch bezel. Initially, the V1 version was not yet technically mature enough and not much effort was spent on the bezel. The V1's bezel had a vibrant red compared to the original; However, the original's decoration was in a pale burgundy tone, so the workmanship of the V1 was not enough to meet expectations. Most of the Clean cola bezels currently sold on the market are V2 versions, not V1, so you don't have to worry about accidentally buying a V1 version bezel.

Clean Rolex GMT Kola Bezelinde v2 ile v2s Versiyonlarının Renk Karşılaştırması - Arka Kapak ve Mekanizma Detayı

Additionally, the bezel of the V2 version was upgraded and the MK4 bezel was used. The red section on the bezel has a slight pink tint and appears red under ultraviolet light. This red achieves an almost identical resemblance to the original. At the same time, over the V2 version, the Clean starch has been upgraded once again to the V2s version; This version was prepared with changes made on V2. Red becomes more visible, especially under ultraviolet light. Based on years of experience, we can easily say that the V1 version is now behind us, there is no need to even mention its name. So how should we choose between the V2 and V2s version?

Clean Rolex GMT Kola Bezelinde v2 ile v2s Versiyonlarının Renk Karşılaştırması - Bilezik, Toka ve Klips Mekanizması

Personally, I think the Clean starch decorated V2 version is more perfect than the V2s version. The main reason is that the red on the bezel of the V2 version is closer to the original; The red of the V2s version is more vibrant. Of course, this is just my personal opinion, just to give you an idea; The real choice is up to everyone's own evaluation. Additionally, the price of the V2s version is a little higher, which may be a point that some watch lovers should think carefully about. However, no matter which version is better, Clean will keep updating it, so you don't have to worry about quality.

Clean Rolex GMT Kola Bezelinde v2 ile v2s Versiyonlarının Renk Karşılaştırması - Makro Kadran ve İndeks İşçiliği

On the price side, the V2s version is slightly more expensive than the V2 version; However, the V2 version is still more advantageous in terms of price-performance. Especially in the bezel section, the MK4 bezel with Clean starch bezel has become the only example in the market that fully matches the original. Integrating the dual colors on the bezel into a single piece is a level of craftsmanship that many manufacturers cannot reach. It can be seen that there is no gap between the two colors at the 6 and 18 o'clock positions; This alone is enough to prove how difficult it is to replicate the Clean GMT starch V2 version. Comparisons with the white edges and seams of other inferior versions on the market have long been ruled out; It is obvious at first glance that it is fake.

Clean Rolex GMT Kola Bezelinde v2 ile v2s Versiyonlarının Renk Karşılaştırması - Klips Kilidi ve Lazer Damgalar

Also, regarding the movement, the Clean GMT has been fully upgraded to the Danxdong 3285 movement; This is a 72-hour Danxdong movement, the only one on the market. The rarity of the mechanism increases the price, and the inadequacy of the production capacity of various parts causes the supply to fail to meet the demand. Generally, after the order is placed, it takes about a few days for it to reach the customer.

Clean Rolex GMT Kola Bezelinde v2 ile v2s Versiyonlarının Renk Karşılaştırması - Bilekte Duruş ve Kasa Orantısı

In addition, the relief frames of the hour markers have been raised in both Clean starch V2 and V2s versions; The inverted triangle at position 12, the round dot markings, and the metal edge sections of the long rods have been machined and polished as required, giving the corners a texture closer to the original. The lume filling is equally spot on. There is no need to mention the other detail workmanship on the dial. If you want to get a top-of-the-line starch bezel, Clean Rolex is the only option. Other manufacturers either cannot make the bezel well or the interior detail work of the dial is inadequate. At this point, everyone needs to make a lot of comparisons.

Clean Rolex GMT Kola Bezelinde v2 ile v2s Versiyonlarının Renk Karşılaştırması - Fosfor ve Super-LumiNova Gece Görünümü

In summary, this review was about the differences between the V2 version and the V2s version of the Clean starched MK4 bezel.

I hope this article helped you. We will be sharing more detailed disassembly, live footage review and real vs. replica comparison in the coming days.

Saat Dedektifi Expert Score

Model: Rolex Super Clone · Clean Factory 1:1
8.8/10
Kasa Geometrisi ve Metalurji8.9 / 10
Kadran Detayları ve İndeksler8.8 / 10
Mekanizma Hassasiyeti ve Rezerv8.7 / 10
Bilezik, Toka ve Tolerans8.8 / 10
4.7

User Rating

49 people rated · Saat Dedektifi Verified Score

Rate this model:

Conclusion & Detective Verdict

As seen in our technical review of the Rolex Super Clone model; The optical tolerances of the case, the dial typography and the stable operating character of the mechanism take the model to the top level of its segment. It is a perfect choice for collectors with its wrist ergonomics, material quality and micron level finishing success.


Frequently Asked Questions (FAQ)

Which movement is used in the Rolex Super Clone model?

In this model, the model's high stability integrated caliber or Swiss-norm Clone movement is used; Deviation tolerance is in the range of 2-5 seconds per day.

What is the case material and stainless steel quality?

Made from solid 904L/316L stainless steel with high corrosion resistance; It exactly reflects the original feeling of weight and texture.

Is there AR coating on the sapphire glass surface?

Yes. There is a colorless double-sided AR coating on the scratch-resistant sapphire crystal glass surface to prevent glare and reflection.

How is the waterproof performance?

With its seal-tested crown system, it is fully resistant to pressure up to 50-100 meters and daily water contact.

Does Saat Dedektifi have expertise assurance?

All technical controls, timegrapher measurements and case tolerances received full marks from Saat Detective expertise standards.


Share:XTelegram