IWC IW356802 ZZ Factory Review

IWC Wristwatch IW356802 model is produced by ZZ Factory with a solid stainless steel case, 44 mm diameter and Miyota 9015 high frequency movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Dial and Hand Details

Below is the factory's description of the ZZ Factory IWC Aquatimer IW356802 44 MM "Little 50 Fathoms" ultra-powerful lume wristwatch:

All hour and minute hand forms and their lume colors are almost exactly the same. The dial is produced with black matte finish; The dial text printing and depth feeling are also the same as the original. The date font is drawn and printed exactly 1:1 in line with the original. Hour markers polished with cut surface; The lume filling of the marks has an outwardly curved, oily shine effect. Miyota 9015 brand new repair mechanism was used as the mechanism. I would like to underline one point here: Noise reduction has been applied to the mechanism used by ZZ Factory; It does not produce any disturbing noise, the sound of automatic installation is almost inaudible.

Case and Body Workmanship

This Aquatimer series uses Japanese 9015 movement, all-sapphire glass bezel and ultra-strong Swiss Super C1/C3 lume powder for detailed comparison.

I've made a pretty comprehensive comparison of dial details before. Since the minute hand is filled with yellow lume powder, obviously one had to compromise between lume brightness and yellow lume powder of the same tone. When you look carefully, you can see a slight color difference in the yellow minute hand, but the overall effect is still extremely good.

The general appearance of the case side surface, brushed processing and chamfering workmanship can be clearly seen in the photographs. ZZ has taken the texture to an almost identical level. A tough, sharp look plus ultra-strong lume; Perhaps this is exactly the most important factor that makes you love this watch. We can say that the crown comparison was made extremely meticulously; be it the IWC logo or the serrated grooves on the edge. I don't want to go into more detail about the workmanship here, because the general workmanship is at a level that can be seen and touched by hand. There are more than enough fine details in this watch to compel you to buy it.

Strap, Buckle and Comfort

The unique mortise lock design eliminates the need for pins for fixing; The 316 steel spring design ear piece is covered with a full fluoride rubber strap. The form of the lock slot, cutting angles and sandblasting of the lower surface are the same as the original. Original and replica straps can be worn perfectly interchangeable.

The original uses IWC's own Cal.30110 movement. We initially considered using the 2892 caliber, but for stability reasons we opted for the Miyota 9015 caliber, which has the same thin thickness. Regarding the stability of 9015, the zero repair performance of this movement is the common opinion of watch enthusiasts; The only drawback is that the installation noise of the automatic rotor is too loud. This time we applied a special noise reduction process, and after the process we achieved almost unprecedented sound insulation. No more that rattling noise. Simple noise reduction will not be enough to achieve this result; It does not fundamentally solve the problem. Most importantly, the sound insulation design based on the original case plays a big role in this. The overall design of the case is completely based on the original, including the engravings on the case back and the engravings on the inside.

Original product at the bottom; The lume effect is obvious at first glance. It is no longer possible to describe its beauty in words: the fierce appearance plus an extremely sharp lume, dazzling. To achieve ultra-strong lume, ZZ spared no expense and ordered Swiss Super C1/C3 lume; The brightness intensity and glow duration are incomparable.

The color option we are launching this time is black plus yellow. We also purchased the original white dial and are currently making corrections to the sample mold. Even if it is the same model, for a different color, we also repurchase the original in that different color.

The original was damaged in the mold opening process. ZZ Factory produced 316 stainless steel spring ear piece to match the lock design case; A completely imported, fully fluorinated rubber belt was used as the belt. The overall effect feels both plump and soft to the touch.

General Evaluation and Conclusion

The above is the comparative review by ZZ Factory; In general, a very careful job has been done. He will make a detailed evaluation about whether it is worth buying or not after receiving the product.