Will the ZF Factory Patek Nautilus 5712R rose gold be updated to real power reserve?

The Patek Philippe Nautilus 5712R model is produced by ZF Factory with an 18K thick gold-plated case, 40 mm diameter and a high-precision automatic Super Clone movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Dial and Hand Details

Let me squeeze in some news: The version of ZF PP5712 with integrated movement and real power reserve hand will be available for shipment soon; approximately mid-June. Additionally, 3K Factory knock-off 5712s have appeared on the market; They claim that it carries an integrated real power reserve mechanism. I asked this to 3K Factory; they have not released 5712 and the product in question does not have real power reserve. You can consult me ​​for details.

In this section, I bring you the 5712R-001 rose gold multi-function chronograph watch from ZF's Patek Philippe Nautilus series. Nautilus is an extremely classic series among Patek Philippe models; The list price is 410 thousand odd, but in reality it cannot be found at this price anymore, the premium is too high. The overall dial layout is also very characteristic; It's a bit more luxurious compared to the 5711. The dial has a few extra functions: power reserve, moon phases, calendar and a seconds dial. It is considered one of the complicated type watches among Nautilus.

It is also paired with a dark brown dial with a gradient effect; It is truly a species that does not tire the eyes and can be looked at for a long time. The lume fill is also pretty decent. There is a bit of jaggedness in the engraving of the stick hour markers; When you look closely at the original, these are more rounded. The overall effect isn't bad though. The upper left corner shows the power reserve; The original has a 48-hour power reserve, while ZF does not have this function; a fake indicator. However, when you turn the hour hand, the hand moves with it, it does not remain fixed at a single point; This can be considered a small compensation. The center shaft is well made though. The small dial at 4-5 direction is the seconds dial, and the 6-8 direction is the calendar and moon phase dial; The inside of the moon phase dial is also gold. It is necessary to be careful when setting this place: (Do not adjust the moon phases and calendar between 9 and 3 o'clock; this is the time period when the calendar gets stuck the most easily, there is no problem in other intervals.)

The diameter of the clock is 40 mm; While its thickness was originally 8.5 mm, it increased to around 9.7 mm in ZF, and it is actually a bit thick. However, when worn on the wrist, this thickness is considered a very thin watch. While the case material of the original is 18K rose gold precious metal, ZF did not use precious metal; He used 316 stainless steel and then coated it in rose gold color. The color of the coating looks pretty accurate overall; However, the color tends to darken as you use it for a long time.

When the screw-in crown is pulled out, the time can be adjusted directly. There is a small gap on the right and left sides of the case; You can easily handle it with a toothpick. The space on the left sets the calendar, and the space on the right sets the moon phases; extremely simple.

Movement and Caliber Performance

Now let's look at the mechanism behind the display of the watch. The 750 mark is very deeply engraved, in matte finish. The bearing seat of this mechanism is slightly offset compared to the original: while it was originally in the 9th direction, ZF has it in the 12th direction. In the original, the balance wheel was in the 6th direction, while in ZF it was in the 9th direction; A few bridge decorations have been added to it, it looks quite convincing. Gears do not move. This is the mechanism of the clock; There are some flaws behind the display.

Strap, Buckle and Comfort

Let's also look at the factory belt. ZF has been very careful in this department; He used crocodile skin material, the pattern is very good and the stitches are very neat. Comfortable and soft when worn. The end piece section is also meticulously processed; Both sides are movable, so it fits the wrist better. Buckle, double button folding type; It also has a precious metal sign inside.

Summary: The ZF Patek Nautilus series 5712R rose gold multi-function chronograph watch is truly well-crafted in terms of details; It is also one of Nautilus' rare models with complications. Moreover, since it is a new model released by ZF Factory, the watch's level of interest is quite high. It has a very textured dial. When worn on the wrist, it suits both sporty and daily use.

I hope my articles will be useful to you. I will share more detailed teardowns, live footage reviews and real-replica comparisons in the following sections.