XF Factory TAG Heuer Carrera Series Red Knight Wristwatch Review

The TAG Heuer Carrera model is produced by the leading Super Clone manufacturer workshops with a 5th class titanium case, 43 mm diameter and ETA 2824-2 caliber in accordance with Swiss norms architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

The XF Factory power is of course more than sufficient, so the investment is naturally higher. Take for example the ceramic raw material, which is the most difficult part of this watch to tackle. 43 mm case diameter was chosen; The lightness feeling on the hand is really good for watch friends with thin wrists!

Dial and Hand Details

In line with previous Carrera series models, a completely open skeleton dial and date window design was preferred; XF special production integrated mechanism is used. The case design abandons the traditional one-piece structure; It is infinitely close to the original, from the raw material ratio of the ceramic to the firing workmanship. The case not only aims for similarity in appearance, but the internal structure and parts of the entire case set are also extremely close to the original.

There is no need to worry about the dimensions of this replica watch, which is produced by taking an exact mold from the original. The 43 mm ceramic case is quite light in terms of weight; It has advantages such as high temperature resistance, abrasion and scratch resistance. Its only disadvantage is that it is sensitive to impacts; Watch lovers just need to be a little careful about this when wearing it. Thanks to the black skeleton dial, it is possible to take a look at the internal mechanism from the front.

Case and Body Workmanship

The matte black titanium carbide coated stainless steel bezel gives a more textured feel compared to the ceramic bezels that are quite common today. A black rubber strap can be adjusted as you wish according to wrist thickness; quite useful.

When viewed from the front, the red hour and minute hands add a very sporty atmosphere. Lume marked, polished and sandblasted hour and minute hands, layout clear and legible. Hand-placed polished and fine matte finished hour markers with white and red lume markers; There is an open skeleton date display with a date window at the 3.5 position.

Minute chronograph counter with silver lume ring at 12 o'clock; chronograph counter with silver lume ring at 6 o'clock; There is a small seconds counter with a black lume ring at 9 o'clock. The lume effect on the dial is quite obvious; It is possible to easily read the time in any environment.

A screw-down crown is used on the side of the case; Black titanium carbide coating technique was also preferred on the outer surface of the winding crown. The black rubber strap is quite thick and plump; This highlights the sporty and stylish atmosphere of the watch.

Movement and Caliber Performance

The mechanism is at a very high level. A special movement based on the XF Factory brand new TAG Heuer Cal.1887 is used; The appearance of the mechanism is almost exactly the same as the original. Operating stability has increased by over 30% compared to previous 7750 chronograph movements; Its quality can completely compete with 2824. We can say that it is really difficult to reach this level in the entire industry.