VS Factory Panerai PAM00799 Submersible Series Watch Review

Panerai Luminor Submersible PAM00799 model is produced by VS Factory with a class 5 titanium case, standard case diameter and Super Clone P.9000 movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Case and Body Workmanship

The replica is also quite successful in terms of size; the same as the original, i.e. 47 millimeters! The bezel is made of carbon fiber material and its pattern looks different in different lights, just like the original; The colors of other small factories remain quite dull. VS Factory also made the lume point on the bezel the same as the original; It is recessed, its filling is extremely smooth and uniform, and there is no deviation in its color. VS Factory has really paid attention to detail.

Two types of materials are used in this watch: metallic glass and carbon fiber composite. Metallic glass is used in the case; In fact, this is essentially a type of steel, not glass. This alloy contains zirconium, copper, aluminum, titanium and nickel; It is processed by forging at high temperatures, the material is extremely strong and corrosion resistant. VS Factory has kept the material in this issue the same as the original.

The other special material is carbon fiber composite; The main component is carbon fiber, which we are all familiar with. The highlight of this material is that it is light and durable. The use of carbon fiber is quite common for VS Factory; For example, the old PAM616 was also carbon fiber. Therefore, VS Factory has a strong technical knowledge in this regard.

Dial and Hand Details

The round hour markers and engraved hour and minute hands on the dial are extremely distinctive; They are covered with super lume coating, so you can read the time clearly even in the dark environment. There is a date window at 3 o'clock and a small seconds dial at 9 o'clock! Overall very impressive; Especially the blue tone on the hour markers and hour and minute hands is greatly appreciated by watch enthusiasts!

When viewed from the side, the shine is extremely beautiful; It is obvious that the workmanship is very mature. The hand feel of the crown protection bridge part of the case is also very good; The VS Factory engraved inscriptions are quite deep and three-dimensional, the processing of the bridge is also very appropriate, and the chamfers on the edges of the case are also made very carefully.

Movement and Caliber Performance

The movement used is the P.9000 based 9010 self-winding mechanical movement produced by VS; It has real stones and a real mainspring box. The balance wheel is positioned at 7 o'clock; Since the balance wheel in the original movement is at 7 o'clock, even if you take it apart and look at it, an ordinary person cannot distinguish it. Only the regulator is different from the original, there is a small difference. Of course, wearing a watch that has been replicated to this level is more than enough; After all, too much of anything is bad, enough for daily use is enough. In addition, this mechanism works extremely stable.