Replica Daytona N Factory JF Factory AR Factory which one is better? What are the pros and cons of each version?

The Rolex Daytona model is produced by Noob Factory with a solid 904L stainless steel case, standard case diameter and 7750 automatic chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Daytona is truly a poisonous passion; As Rolex's most complex watch series, the many color options currently in stores are in high demand, far surpassing even the famous Submariner.

There are many versions of the Daytona on the market right now, and many people are wondering which one to choose. Today I will tell you in detail: First of all, the three versions that are considered the best in the market are JF Factory, AR Factory and N Factory custom-made 4130 version (hereinafter N Factory for short). All three versions were released during the same period; So what's the real difference between them? Let me explain briefly below.

Case and Body Workmanship

Originally the top version on the market was JF Factory; It used 316L steel, carried the Shanghai 7750 chronograph movement, and its functions worked exactly like the original.

However, the JF version is 1.5 mm thicker than the original, reaching 14.4 mm.

In the second half of last year, AR Factory popped up (essentially a sub-branch of JF Factory focusing on high-end products) and launched the Daytona series using 904L steel. A certain improvement has also been made to the general appearance; The engravings on the ceramic bezel and the dial surface are much more difficult to distinguish from the real thing compared to the JF!

Its thickness was also reduced to 13.1 mm; A full 1.3mm thinner than the JF. To achieve the same thickness as the original, AR Factory eliminated the chronograph minute and chronograph hour hands on the movement; However, the chronograph seconds hand is working.

Finally, let me talk about the N Factory version that everyone is most curious about. Its promotion started at the end of last year, but it was only shipped after three or four months of delay. It turns out that the shipping speed was also incredibly slow; It is not clear whether the production of the movement is not keeping up or whether it is being sold in limited quantities on purpose. The odds of getting your hands on one are literally like winning the lottery!

Dial and Hand Details

The advantage of the N Factory version is that it replicates the original 4130 movement; While all chronograph functions work, the thickness is exactly the same as the original, namely 12.6 mm. In other words, it's even 0.5mm thinner than the AR version.

Movement and Caliber Performance

The movement of the N Factory version is specially made according to the appearance of the original 4130 movement and uses KIF shock absorber. A lot of effort has been put into the appearance of the mechanism. Here are some high resolution real shots of the N Factory custom made 4130 movement:

When it comes here, everyone will ask: So which one to choose in the end? Actually, I explained the pros and cons of each version very clearly above; You can choose according to your own needs. If you still can't decide, let me analyze it in depth for you.

1. Let me talk about the thickness first

J.F. 14.4; AR 13.1; N 12.6. It is actually quite difficult to distinguish this thickness difference when worn on the wrist; This difference mostly affects the wearing comfort; the thinner the watch, the better it fits on the wrist. JF is actually quite a bit thicker than AR and N; The thickest JF is 1.8 mm thicker than the thinnest N, and this difference is clearly felt when held in the hand. You can hardly notice the difference between AR and N.

2. Now let's come to the view

Looking at the watch in general, AR still does it best. AR's ceramic bezel engraving is the most faithful to the original of the three versions. In addition, AR also uses 904 steel, the other two versions are 316L steel.

3. Finally, let me touch on the mechanism functions that everyone cares more about. In JF and N, all functions work, in AR, only the chronograph seconds hand works. Many people rule out AR right from the start, but that doesn't actually make any sense. Because in mechanical watches with chronographs, even if all the functions work, we recommend that you use the chronograph function as little as possible or not at all; Because operating the chronograph will seriously damage the mechanism. Moreover, when the chronograph button is pressed in AR, the chronograph second hand works and can also return to zero, only the chronograph minute and hour hands do not accumulate time.

If you care about price/performance and are not too much after details, JF is a good choice; After all, the top version has sat in its seat for a long time, and its workmanship does not disappoint anyone. But for now, the one I recommend the most is the AR version; The reason is that its appearance is beautiful, its thickness is balanced and it uses 904L steel. Many people ask why I don't recommend N. Actually, N is also a very good choice, but its disadvantage is that its price / performance is very low (since it monopolizes the custom-made 4130 movement, its price is much higher than the other two versions). And also: out of stock! No stock! No stock!

Friends who do not fully know the functions of Daytona can take a look at the diagram below:

Since you've come this far, the Daytona versions on the market are now clear in your mind. Concretely, which one you choose is up to your personal needs! Thank you very much to all watch friends for watching!