PPF Factory v4 version Patek Philippe Nautilus 5711 replica watch real shot review

Patek Philippe Nautilus 5711 model is produced by PPF Factory with a solid stainless steel case, 40 mm diameter and Miyota 9015 high frequency movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

First, let's measure in general: the outer bezel diameter is 40 mm. As for the thickness, the factory says it's 8.5mm, I actually measured about 8.6mm. The difference between the 8.3 mm and the original cannot be felt in the hand at all, there is a very small difference. Of course, there is a small margin of measurement error here. Many watch lovers also ask: How do I know whether the Nautilus I bought is really PPF Factory production? This is a good question. It is enough to measure its thickness directly with a caliper. Currently the thinnest thickness on the market belongs only to PPF Factory. Therefore, measuring thickness is the most direct and effective way to distinguish. Now let's look at it together below.

Which places have been improved in PPF Factory v4 version Nautilus?

The first improvement is the correction of the ratio of brushed and polished surfaces on the bezel. In previous versions, the brushed surface was made too wide and the polished surface was made too narrow, and this was very noticeable. After this correction, as you can see from the camera, this one looks much more natural.

The second improvement is that the hour markers on the dial use the same lume coating as the original and come with metal, three-dimensional hour markers. When viewed through the camera, this improvement is not very noticeable. Only the engraving on the edges of the hour and minute hands and stick hour markers on the dial is much smoother than its predecessors; There is no burr, extremely fine workmanship.

Third improvement, the links of the stainless steel bracelet have been enlarged and the range of motion has been re-adjusted. We see through the camera that the links of this watch are actually made much more carefully than previous versions; The fit between the bracelet and the wrist has increased, which makes the watch feel more comfortable when worn and does not feel bulky in the hand.

The fourth improvement is more about the mechanism and has two points. First, the double P steel relief engraving, which is the symbol of Patek Philippe, has become deeper, more three-dimensional and clear. The other is, as we can see from the camera, the shock absorber on the balance is changed from the old triangular form to the horseshoe form. These two improvements make the case back look much closer to the original. Although the PPF has been upgraded to the one-piece movement version, its basis is still the 9015; only the bridge plate has been removed. Therefore, the setting direction of the calendar is still different, that is, in the opposite direction to the date setting direction of the original. This is due to the functional limits of the mechanism. As for the date setting direction being different, I think there is no need to worry too much about this issue.

PPF Factory v4 version Nautilus 5711 replica watch real shot photos

Finally, let me summarize: From the four improvements above, we understand that this watch has been made very successfully in terms of appearance and mechanism. Through a few updates, we can see that the PPF factory is really working hard and only aims to do better and better. With this update, we can clearly feel that PPF Nautilus is the best production in the industry; It surpassed all previous copies. Only if you can do better, you can take it to the place it deserves.

We've come this far. I hope my articles will be useful to you. I will share more detailed disassembly, real shot review and real-replica comparison in the future.