Omega Seamaster Diver 300M 8806 OR Factory Review

The Omega Seamaster Diver 300M 8806 model is produced by OR Factory with a high-tech ceramic case, standard case diameter and high-precision automatic Super Clone movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Is OR Factory Omega rose gold Seamaster 300M full ceramic with 8806 movement considered a high-end replica?

First you need to know this: OR Factory made several major technical breakthroughs when molding this watch. They technically fell in line with the original in terms of case design; Three special technologies make this watch dazzling! All three items below are OR Factory's official statement! First: Regarding the case, this watch is the only one in the industry that can directly cut threads on the ceramic case; It screws the crown tube directly to the ceramic case, so that the tube does not fall off and the water resistance is better. The case back is also screwed directly to the ceramic case; Other factories can only screw on the case back by adding a steel inner body! Second: OR Factory is also the first factory that can thread a ceramic bezel; There is no need to insert a steel piece to rotate it anymore, the sound is clearer, and the bezel design is also quite attractive! Third: Thanks to the special full ceramic body, there is no need to add a metal middle body for waterproofing; Other factories make a steel inner body in the middle of the ceramic case and thus ensure water resistance. The brief summary of these three items is about the case mould: one-piece casting allowed the watch to achieve a groundbreaking design in the case. Now let's briefly examine the details of this watch!

As for the case mold of the watch, as I evaluated above, the watch has a full ceramic design from start to finish; This is a breakthrough for OR Factory. After all, there is no stainless steel as support inside, this type of mold also increases the production cost of the watch. This work, carried out by OR Factory without considering the cost, allowed watch lovers to experience the most impressive charm of the original. The ceramic engraving throughout the watch is very soft and rounded; The hand feeling is extremely comfortable, chamfering work has been applied on the sides, which makes the watch very comfortable. Please pay attention to the following: You should handle the ceramic watch with care in the next use and avoid damage such as impact. Even though ceramic watches do not break easily, it is always good to be careful!

The bezel of the watch is again ceramic design this time; In the original, zirconium dioxide is used, that is, it is simply ceramic material and one-piece casting. The hour markers on the bezel are quite three-dimensional. The bezel rotates in one direction; Thanks to the mechanism inside, the rotation sound is extremely clear. There is a lume point at 12 o'clock. The real shot photo this time is of the rose gold bezel; The precious metal marking on the side of the bezel is also clearly visible, which is a very appropriate detail! Regarding the glass, this watch comes with sapphire glass; The transparency of the glass is extremely clear, and the clarity is further increased by applying a coating to the glass. The glass will not show scratches even after long use!

As for the side design of the watch, there is also the HE crown on the left; This crown has no real function but can still be turned normally. The engravings on it are also extremely clear. On the right side there is the time setting crown; The Omega logo on it is also very clear. Thanks to the processing quality of the ceramic, the water resistance of the watch is also quite good. Pay attention to the following here: on the recessed crown, pay attention to the method of tightening the crown when using the watch, so that the threads do not come loose. There is a waterproof seal protection inside the crown. Additionally, with the addition of the mechanism, there is only one step when setting the time; This is quite a breakthrough in terms of content compared to the molds of some previous factories!

The dial surface of the watch is the same as the previous Seamaster 300; A new type of ceramic dial is used. There is also a zirconium dioxide marking on the dial. The wave pattern throughout the watch adds a sporty atmosphere to it. The fonts on the dial are also very clear. The hour markers on the inside of the watch are filled with lume coating; The hollow hour and minute hands and the circular dot at 12 are coated with Super-LumiNova lume coating. The processing of the dial surface is also extremely appropriate; In terms of detail workmanship, this factory has truly achieved flawless perfection. There is no date window on the 43.5mm Seamaster; OR Factory made an innovation in this regard and made the watch identical to the original in terms of setting, which is a detail that many factories cannot reach!

As for the case back, OR Factory has also been meticulous in the details this time. The ceramic material screwed case back is screwed to the ceramic case; Omega calls this screw structure the Naiad lock. This tooth is very short; It locks the entire case back with a slight movement, which means it is different from the screwed case backs we are used to, which are constantly turned until it jams. Such a structure is again made of ceramic material this time; This is also quite appropriate. OR Factory has also done a very good job in terms of the detail workmanship of the case back; The writings on the back are extremely clear, the engravings are three-dimensional. There is also a waterproof seal on the back, which increases the waterproofness of the watch!

You can also watch the 8806 movement from behind the sapphire glass case with wavy edge design. For this mechanism, OR Factory used a single piece mechanism. Here you need to know this: This time, OR Factory did not print the Omega logo on the shock absorber point. This was a point of information he had touched on before; This is done to avoid suspicion, and the mechanism factory is also being cautious. In all today's OR Factory Seamasters, the shock absorbing point of the rear mechanism is designed in this way; OR Factory had previously announced this news. Although the handling of this small detail is a bit sad, it is a difficult detail to see; Moreover, the overall workmanship of the watch can compensate for this small deficiency. Ultimately, the pressure on the replica market is very strong; Being cautious can reduce some problems in the future and also secure the watch's subsequent after-sales support!

As for the strap side of this 43.5 mm Seamaster 300, this time it comes with a rubber strap; no ceramic strap or steel bracelet. The choice of rubber strap also adds a sporty character to the watch. The workmanship of the strap is extremely comfortable, and the writings on the back are very clear. As for the buckle, ceramic material was used again this time; The hand feeling of the buckle is very comfortable. The choice of buckle also increases the ease of use of the watch!

Summary: In this section, I evaluated the workmanship of the OR Factory Omega Seamaster 300 full ceramic rose gold model. The pattern work of the watch this time is generally very appropriate; OR Factory has also made a technical breakthrough in case processing. With the addition of the 8806 movement, the watch has gained a mature style both inside and outside and offers a powerful experience to watch lovers! I hope this article helps you. I will share more detailed disassembly, real shot review and real-replica comparison in the following sections.