IWC Pilot IW326802 Review

IWC Pilot IW326802 model is produced by the leading Super Clone manufacturer workshops with a special alloy bronze case, standard case diameter and ETA 2824-2 caliber architecture in accordance with Swiss norms. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

One. Pioneer of bronze; Many years of production experience and technology that masters the rules of bronze oxidation;

Two. Strict quality control standards, stable mechanism, no rattling noise of the rotor;

Three. How do you experience the oxidation charm of this bronze Spitfire?

Four. How does it differentiate from other small factory versions on the market?

One. XF — the pioneer of bronze

The unique appeal of the bronze case lies in the fact that it is much more playable than other metal cases. The copper component in bronze reacts with air and creates an oxidation effect. Thanks to this change, everyone who wears a bronze watch gets a different oxidation effect on their watch depending on the different environments they live in, leaving unique marks on the watch.

A few years ago, Panerai started a bronze trend in the watch world with the release of the Luminor Submersible 1950 PAM382. XF's story with bronze started with Panerai PAM382. Then XF; He produced the PAM507 and PAM671, Zenith's bronze Pilot large model, the bronze knight model and the blue dial bronze Pilot model, and Tudor's red bronze and blue bronze models. As can be seen from the latest Tudor blue bronze model that was renewed and launched, XF did not hesitate in the production workmanship of the bronze material; Thanks to his constant research he was able to capture this relatively stable oxidation effect that we see today on the IWC bronze Spitfire. This is something small factories cannot achieve.

As we know, the production of a bronze case and the production of a steel case are not much different in terms of difficulty; As long as the raw material contains copper, it will oxidize. But is this really the kind of oxidation we want?

The real challenge is how to oxidize the bronze casing at the rate we want and with the effect we want. XF has constantly researched this challenge, accumulating experience. Finally achieved the IWC bronze Spitfire oxidation effect closest to the original. When you compare it with the small factory versions on the market, you can easily see that their oxidation color is uneven, darkening, and black, clustered rust spots easily form.

Two. Strict quality control standards, stable mechanism, chatter-free rotor;

1. All XF produced IWC bronze Spitfire watches are assembled in a standard manner in assembly factories with brand assembly authority; thus ensuring the stable operation of each IWC bronze Spitfire.

2. Each IWC bronze Spitfire watch from XF passes 100% high-intensity vacuum water testing; As long as the XF version is an IWC bronze Spitfire, you don't have to worry about waterproofing.

3. Appearance and powder quality control is carried out at the same level as domestic brands. As soon as a problem is detected, that watch is not released. Unlike the small factories in the market, it does not ship the product as if it were fishing in muddy water when it is obvious that it has a quality problem or defect. That's why it's so important to choose a reliable version.

4. Every IWC bronze Spitfire watch from XF is 100% time-tested to Swiss standards. Each bronze Spitfire's daily margin of error is kept within ±15 seconds. You don't have to worry about time error unless the watch is dropped and hit. Weak and problematic mechanisms are eliminated at this stage. Small factories, on the other hand, mix and ship them even if they know there is a problem.

5. Seagull 2824, the most common and most stable movement in the country, was used.

For this IWC bronze Spitfire, the XF factory considered many movements, including Seagull's 2892, 2836, 2824 and Citizen's 9015. After taking everything into consideration, he decided to use the Seagull 2824 movement. The original carries IWC's own caliber 32110; No matter which movement is used, the appearance of the movement does not match, and it is a model with a closed case back. That's why the one with the most stable mechanism quality was preferred. On the Citizen 9015, there is a clicking sound when the rotor rotates; This is the common flaw of this mechanism and no one wants to hear the clatter of the rotor every time they shake their arm. That's why in the end, the Seagull 2824 movement, which everyone found most suitable, was preferred.

1. Belt remover — belt removal tool;

The calfskin strap breaks down easily and creates bad odor when it comes into contact with water. So when you want to restore the bronze Spitfire, please remove the strap using the strap remover that comes with the watch. Separate the watch body and buckle. The tool is sharp, please be careful when using it.

2. Eraser — light repair tool;

When we touch the case with sweat on our fingers, fingerprints or unpleasant oxidation marks may appear on the case. Then you can easily remove these marks using an eraser.

3. Ketchup — complete rejuvenation tool;

When you feel like leaving the old one behind and wanting a new one (joking), you can apply ketchup to your heart's content on the watch body and buckle. After 3 minutes, you can regain the feeling of the first day. Of course, there are many renewal methods; After trying them all once, we decided that ketchup is the one that suits you best. Practical and clean. (Compared to vinegar)

The copper component in bronze reacts with air and creates an oxidation effect. The two watches in the photo are from the same lot; The one on the right is the watch we just remade with ketchup. Once the refurbishment was completed, the watch body took on a fresh, soft rose gold hue; Its appearance is extremely pleasant, especially for obsessive people like us. This process of oxidation and restoration is the very attraction that bronze offers us.

Thanks to oxidation, everyone who wears a bronze watch creates different oxidation marks on their watch depending on the different environments they live in and leaves unique traces on the watch.

Restoring it to its original state gives you a completely different start. Your favorite watch will be like the first day again and give you pleasure.

1. Mechanism, as we mentioned above. The mechanism of the XF bronze Spitfire is both stable and low in noise when its rotor rotates. If you hear a clicking sound when you put your bronze Spitfire on your arm and shake it, you should be careful.

2. Most people can hardly see the difference when looking at things like case lines. But everyone can feel whether the edge of the case is pricking or not when they hold it and touch it. Small factories do not pay attention to these details; Case edges scratch your hand badly.

3. The XF bronze Spitfire has lettering and logo on its rotor. In small factories, the rotor is usually empty.

4. When you purchase an XF bronze Spitfire, an IWC bronze Spitfire experience set is gifted with the watch.