Joker Factory Submariner 126610ln 126610lv Watch

The Rolex Submariner 126610LN model is produced by the leading Super Clone manufacturer workshops with a solid 904L stainless steel case, standard case diameter and ETA 2824-2 caliber in accordance with Swiss norms architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

One, bezel

1. Joker cooperated with the HANKOOK ceramic factory in Korea to thoroughly analyze the composition of the original Cerachrom green ceramic bezel. The special feature of Rolex's Cerachrom ceramic bezel lies in the meticulousness of its craftsmanship. First, a certain amount of coloring and shaping additives are added to the nano zirconium oxide powder and mixed, then it is dried and hardened; Then, the grains are dispersed and the raw material is shaped by pressing it into the mold cavity with an injection molding device, and the ceramic bezel outline is obtained. This is just a small part of the process. The green blank is sintered at high temperature at 1600°C for 96 hours; It then turns into a pure, bright green bezel through precision machining and surface polishing. The color was adjusted through hundreds of trials, and in the end, a temple-level golden green ceramic bezel emerged, which even experts would have difficulty distinguishing from the real thing with the naked eye.

2. Bezel markings were made according to measurements extracted from a 3D scan of the original; The space at the top of each digit is wide and the space at the bottom is narrow. Not evenly spaced at the top and bottom like on the market! The markings are laser engraved and engraved; When magnified, the slight chamfering on the edge of each mark appears to be exactly the same as the original.

3. Rolex uses the physical vapor deposition (PVD) technique to color the molded numbers, signs and inscriptions on the ceramic bezel. In this process, the one-micron-thick metal covers the entire ceramic, depending on the metal material of the watch. In the final processing stage, the metal on the ceramic surface is removed and the bezel is given a shiny appearance; The precious metal in numbers, signs and writings is protected and remains clear and legible. Joker implements the original factory workmanship exactly: first, the ceramic bezel in which the numbers and signs are embedded is fired, then the entire bezel is plated with platinum; The metal coating on the bezel is then polished and removed, leaving only the metal coating on the numerals and hour markers, while the remaining ceramic surface gives a smooth and shiny effect. Since 18 carat platinum powder is electroplated at high temperatures on the signs and inscriptions, the text color is permanent; Even if it comes into contact with water and oil, it does not fade or darken.

4. Beeswax colored lume beads!

Double-sided, spherically curved sapphire glass bead; When enlarged, the milky white tone on the inner metal edge is seen, same as the original, and the lume color is exactly the same as the lume color of the hour markers.

5. İçten geçmeli bezel!

The ceramic ring and the bezel base are joined using the internal fit method; It is not glued with double-sided tape like the small workshops on the market. The tolerance between the bezel base and the ceramic ring should be kept within 3 c; Otherwise the ceramic ring will crack easily during assembly!

Two, dial surface

1. The stick-shaped hour markers on the dial surface are round and smooth; inner and outer edges are flawless, smooth and shiny without any traces of vibration.

2. The text printing on the dial surface is free of burrs; The edges of the text are embossed, full and shiny, just like the centre.

3. Dial markers are filled with mineral-based lume powder imported from Switzerland; Swiss super lume code BGW9 was used. Its surface looks like sandstone glass; Its brightness is at the same level as the lume bead on the bezel, hour and minute hands, and hour markers. The lume powder on the surface is slightly lower than the edge of the stick marks.

Dial and Hand Details

Three, hour and minute hands. The central axis of the Joker's seconds hand is straight; The edges are chamfered, the ridge in the center is higher than the central plane of the seconds hand. All three hands are hand-crafted and patterned, plated with real white gold and given a brighter appearance. Swiss BGW9 ice blue lume was used; lume effect is much better! The grooves of the minute and hour hands are perfectly processed, no burrs are visible to the naked eye; The tips of the hands are more pointed, but they are rounded so they do not sting the hand.

four, safe

1. Imported 904L stainless steel was used throughout the case; The amount of chromium, nickel and molybdenum it contains is 1.5 times that of 316L. This makes it more resistant to corrosion and oxidation, and more resistant to scratches and wear. Many areas have been brushed with high density. The case form is based on the mold taken from the original; The chamfers and curves match the original exactly, perfectly reflecting the texture and character of the original. Its size and thickness are also the same as the original.

2. Screw-down crown, triple waterproof system with a three-stage lock and protective shoulders on both sides of the crown. The classic ROLEX crown engraved on the tip of the crown is identical to the original in size and position; The engraving is finely processed, looks clear, and the indentation is distinctly felt when touched.

3. Rehaut

Laser LOGO on beveled rehaut with English and number fonts same as original. Each watch has a single and unique code, it is never repeated.

4. The teeth on the case back are embossed and clear; Its polished edges are the same as the original, and the round chamfer between the teeth and the plane also matches the original exactly.

5. The inscriptions on the case body are CNC engraved; The background color of the texts is bright and the same as the original.

Case and Body Workmanship

Five, steel bracelet. The middle of the links of the bracelet is brushed and both sides are polished; It feels very nice in the hand and the strap edges are extremely smooth. The three-piece folding buckle gained an even more elegant appearance after being polished; The details on the inner surface of the buckle are processed cleaner and more carefully. Since the ear screws of the bracelet are hand-machined, the threads do not slip and there is no difficulty in tightening them. The 'dragon and phoenix' figure on the buckle and other engravings were made with the same technique as the original; not by ordinary laser or acid etching method. The surroundings of the dragon and phoenix logo are rounded; The ground texture is very fine grained and feels smooth to the touch. The tortoiseshell-shaped outer plate of the buckle is rectangular; Manufactured in one piece of machine-pressed 904L stainless steel. The outer safety latch of the buckle is the same as the original: when you hold the inner part of the buckle with one finger and press the buckle body with your other finger, the outer safety latch opens by itself.

Movement and Caliber Performance

Six, mechanism. Joker Submariner comes with the brand new 3235 movement; Its free-sprung structure makes the appearance even more realistic. It offers 72 hours of power reserve. This is where it differs from other 3235 movements on the market: Since the actual power reserve of the 2824/2836 movements is around 38 hours, it can only last one night. The brand new 3235 movement worked non-stop for a whole weekend in the tests; Its stability is also higher than other 3235 movements available on the market. A truly permanent solution! Seven, warranty card. Joker Submariner's warranty card, label and rehaut code combine into a single code; The warranty card has NFC reading feature. Eight, quality control. The Joker team implements extremely meticulous quality control, seeking near perfection; The quality control of each mechanism starts from its source. Each watch is fine-tuned by Joker watchmakers before leaving the factory and shipped after waiting for 24 hours to ensure its perfect condition.

Joker always maintains his first-day determination and aims for perfection! It will continue to produce watch replicas in Rolex's original mold quality for all watch lovers.