Rolex Submariner 126610 Review

The Rolex Submariner 126610 model is produced by the leading Super Clone manufacturer workshops with a solid 904L stainless steel case, standard case diameter and ETA 2824-2 caliber in accordance with Swiss norms architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Case and Body Workmanship

Imported 904L stainless steel is used throughout the entire case set. Its content (chromium, nickel, molybdenum) is 1.5 times that of 316L; This makes it more resistant to corrosion and oxidation, as well as more resistant to scratching and wear. Many areas have been treated with high density brushing. Since the case form is produced from the original mould, the chamfers and curve lines fit exactly to the original; It perfectly reflects the feel and character of the original. The size and thickness are the same as the original.

As for the bezel, the hour markers were made using a 3D scan of the original. The space at the top of each digit is wide and the space at the bottom is narrow; The beginning and end are not evenly spaced like in the market! The hour markers are laser engraved and engraved; Upon magnification, the edge of each mark appears to have been finished with the same fine chamfering process as the original. Let's unpack the composition of the original Cerachrom green ceramic bezel. The feature of Rolex's Cerachrom ceramic bezel lies in the meticulousness of the production process. First of all, a certain amount of materials such as colorants and shapers are added to the nano zirconium oxide powder and mixed, then it is dried and hardened. Then, the dispersed particles are injected into the mold cavity with an injection machine and shaped, and the ceramic bezel outline is obtained. This is just a small part of the entire process. The green outline is then sintered at high temperature at 1600 °C for 96 hours, then undergoes precision machining and surface polishing to turn it into a pure, bright green bezel. The color is adjusted hundreds of times, resulting in a golden-emerald green ceramic bezel that suits the pinnacle presented to you; Even experts have difficulty distinguishing the real thing from the replica with the naked eye.

Physical Vapor Deposition (PVD) technique is used to color the molded numerals, hour markers and inscriptions on Rolex's ceramic bezel. In this process, a micron-thick metal covers the entire ceramic, depending on the metal material of the watch. In the final processing stage, the metal on the ceramic surface is removed to give the bezel a shiny appearance. The precious metal in the numerals, hour markers and inscriptions are protected and provide a clear, easy-to-read result. Joker follows the original factory process exactly: first, the ceramic bezel with embedded numerals and hour markers is fired, then the entire bezel is coated with platinum plating, then the metal coating on the bezel is polished; While the metal coating on the numbers and hour markers is preserved, the ceramic color in the rest of the section gains a smooth and shiny appearance. Thus, 18k platinum powder is coated on the hour markers and inscriptions by high-temperature electrolysis; This ensures that the text colors are permanent and do not discolour or darken when in contact with water or oil.

Dial and Hand Details

Beeswax color lume dot! Double-sided round sphere curved sapphire glass bead; When enlarged, you can see that it is the same as the original, and the milky white tone of the inner metal edge. The lume color is the same as the lume color of the hour markers.

Internal bezel slot! The ceramic bezel and the bezel base are combined with an internally attached method; It is not glued with double-sided tape like the small workshops in the market do. The tolerance between the bezel base and the ceramic bezel must be kept within 3 c; Otherwise, the ceramic bezel will crack very easily during assembly!

We will basically discuss the dial surface section in three points.

1. Dial stick hour markers are rounded and smooth; The inner round edge and the outer round edge are flawless, smooth and shiny without any vibration marks.

2. No burrs on dial text printing; The text edges are three-dimensional, full and bright, just like the text centre.

3. The dial hour markers are filled with Swiss imported original liquid powder mineral lume powder; code BGW9 Swiss super lume. The surface has a sandstone-glass appearance. Glow brightness; The lume dot is the same as the hour and minute hands and hour markers. The lume dust on the surface is a little lower than the edge of the hour marker sticks.

As for the hour and minute hands, the center shaft of the Joker's seconds hand is smooth, with the edges finished with a chamfer process; The protruding part of the center shaft is higher than the center plane of the seconds hand. All three hands are hand-engraved and patterned, plated in real white gold; The effect is brighter. Equipped with Swiss BGW9 ice blue lume, the lume effect is much better! The groove workmanship of the minute and hour hands is more perfect, no burrs are visible to the naked eye. The tips of the hands are more pointed and rounded; It doesn't hurt.

The screw-down crown on the side has a triple waterproof system with three locks. There are protective shoulders on both the right and left sides of the crown. The classic ROLEX crown engraved on the top of the crown; The size and position are exactly the same, finely processed, clear and legible. The indentations and protrusions are clearly felt when touched by hand.

On the inside of the case back, there is a laser engraved LOGO on the beveled inner surface; English and number font same as original. Each watch has a serial code, never repeated. The teeth of the case back are three-dimensional and clear; The polished edges are the same as the original. The round chamfer between the teeth and the plane is also the same as the original. The inscriptions on the case body are engraved with CNC; The text background color is the same bright font color as the original.

Movement and Caliber Performance

On the movement side, the Joker water ghost is equipped with the brand new 3235 movement; Thanks to the regulator-free structure, the appearance is more realistic. It offers 72 hours of power reserve. Unlike other 3235 movements on the market, the actual power reserve of the 2824/2836 is around 38 hours, meaning it can only last one night. According to the test results, the brand new 3235 movement can work continuously for a weekend; Its stability is also higher than other 3235 movements available on the market. A truly permanent solution!

The middle part of the links of the steel bracelet is brushed and the two sides are polished; The feel in the hand is great. The strap edges are machined very smooth. The three-link folding clasp has gained a much more elegant appearance with the polishing process. The detail work on the inside of the buckle is cleaner and finer. The ear screws of the steel bracelet are machined by hand; There are no problems such as thread scraping or difficult removal. The 'dragon-phoenix figure' and other engravings on the buckle are made with the same process as the original; Not your ordinary laser or acid etching process. The surroundings of the dragon-phoenix LOGO are rounded; There is a very fine grained texture on the subfloor and it feels smooth when touched by hand. The tortoiseshell outer plate of the buckle is square and smooth; It is produced as a single piece of machine-pressed 904L stainless steel. The external safety lock of the buckle is the same as the original: just hold the inner part of the buckle with your finger and press the buckle body with the other finger; The external safety lock opens automatically.

Finally, in the Joker water ghost, three of the warranty card, product label and in-case code are compatible with each other; The warranty card also has NFC reading feature. In terms of quality control, the Joker team works with almost perfection. Quality control of each mechanism starts from its source; Before each watch leaves the factory, Joker is adjusted by watchmakers to bring it to its optimum condition, then left for 24 hours to ensure its condition is perfect, and only then does it leave the factory.