Review: VS Factory vs OM Factory Omega new Seamaster 300 model compared to the original — which replica is better?
Comprehensive comparative analysis of Factory and Om Factory Omega New Seamaster 300 Model Compared to the Original with Review: Case finishes, movement precision, dial details and production tolerances are examined in detail with Saat Detective expertise standards.
Today, brother will bring together VS Factory, OM Factory and the original watch and make a visual comparison for you; Let's see together!
Glass coating color comparison
The glass coating color of the OM is noticeably bluer than the original; VS is very close to the color of the original.
Lume point comparison
The lume area of the OM's lume dots is noticeably much smaller than that of the original; The size of the VS is exactly the same as the original.
Ceramic bezel inscription comparison
The color of the inscriptions on the OM's ceramic bezel is incorrect; OM's writing is silver gray and very dark. In the original, it was filled with pure white enamel and the writing grooves were completely filled neatly. In this regard, VS and the original are almost identical.
Dial comparison
The original dial is made of ceramic material; After polishing, its surface is smooth as a mirror and the wave pattern processed by laser craftsmanship is extremely clear. VS's ceramic dial fully follows the craftsmanship of the original; Whether it is smoothness or clarity of wave pattern, it completely rivals the original. The dial of OM is made of ordinary copper plate; It does not even come close to the level of VS and the original in terms of both the general smoothness of the surface and the clarity of the wave grooves.
2. OM's dial color is painted black; The color is noticeably much blacker than the original. The dial of VS and the original are in the natural color of the ceramic.
Comparison of hour and minute hands
The red at the tip of the OM's seconds hand is noticeably lighter than the original; The red of the VS is the same vivid as the original.
Steel bezel comparison
The protruding tip on the OM's bezel is too sharp; noticeably much pointier than the original. VS and the original are exactly the same.
Air release valve comparison
1. The end of the air release valve has a beveled chamfer in the original and VS; but OM does not have this, there is a direct round surface.
2. The letters He on the air release valve of OM are very small and blurry, without a three-dimensional appearance. In VS and the original, these letters are very clear and have a distinct depth.
Comparison of red seal inside air release valve
The red seal inside the OM's air release valve is installed in the wrong place; The gasket is placed on the valve itself and the red gasket is still visible after the valve is screwed and tightened. In VS and the original, the red gasket is attached to the pipe, so the red gasket is not visible after the valve is screwed on.
Crown comparison
The shape of the tip of the OM's crown is completely different from the original; VS looks the same as the original.
Completed watch thickness comparison
The OM's case body is noticeably much thicker than the original; The total thickness of the case is 15 mm, which is 1.3 mm thicker than the original.
The thickness of the VS is the same as the original, both are 13.7 mm.
Bottom clearance comparison
There is a lot of space between the automatic rotor of OM's movement and the glass case back; When viewed from the bottom, the mechanism appears to be buried very deeply and its difference from the original is obvious.
VS, on the other hand, has the same appearance as the original in this regard.
Shock absorber comparison
VS is the only factory in the entire industry with the exact same shock absorber as the Omega original; The external appearance and shape of the shock absorber are exactly the same as the original. The shape of OM's shock absorber is completely different from the original.
End piece comparison
The shape of the end piece of the OM is completely wrong. In the VS and the original, this part is bent in a wide and gentle curve, its lines look very natural. The surface of the end piece of the OM is flatter; It makes a small curve with a sharp turn and then goes straight down, and its difference from the original is extremely obvious.
Finally, let's take a look at the visual comparison of VS Factory and the original:
Thanks for watching.
Saat Dedektifi Expert Score
Model: Omega Seamaster 300 · 1:1 Super Clone MasterUser Rating
31 people rated · Saat Dedektifi Verified Score
Rate this model:
Conclusion & Detective Verdict
As seen in our technical review of the Omega Seamaster 300 model; The optical tolerances of the case, dial typography and the stable operating character of the movement take the model to the top level of its segment. It is a perfect choice for collectors with its wrist ergonomics, material quality and micron level finishing success.
Frequently Asked Questions (FAQ)
Which movement is used in the Omega Seamaster 300 model?
In this model, the model's high stability integrated caliber or Swiss-norm Clone movement is used; Deviation tolerance is in the range of 2-5 seconds per day.
What is the case material and stainless steel quality?
Made from solid 904L/316L stainless steel with high corrosion resistance; It exactly reflects the original feeling of weight and texture.
Is there AR coating on the sapphire glass surface?
Yes. There is a colorless double-sided AR coating on the scratch-resistant sapphire crystal glass surface to prevent glare and reflection.
How is the waterproof performance?
With its seal-tested crown system, it is fully resistant to pressure up to 50-100 meters and daily water contact.
Does Saat Dedektifi have expertise assurance?
All technical controls, timegrapher measurements and case tolerances received full marks from Saat Detective expertise standards.
