What is the quality of the GF Factory Breitling Chronomat mechanical chronograph b01 bracelet model?

The Breitling Navitimer model is produced by the leading Super Clone manufacturer workshops with a solid 316L stainless steel case, standard case diameter and 7750 automatic chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Is the GF Factory Breitling Chronomat mechanical chronograph b01 replica watch obvious at first glance?

The diameter of the watch is 42.7 millimeters and its thickness is 15.5 millimeters. The original is 15.1 millimeters; So the thickness and dimensions are almost the same as the original.

As for the glass, the manufacturer used sapphire crystal glass here. Since it is glass blue coated, it provides very good resistance to abrasion and scratching. The glass sits higher than the bezel, which is true to the original.

Polished workmanship has been applied to the bezel, and a brushed surface has been used on the sections where the numbers and hour markers are located. A unidirectional rotating bezel; It feels very nice in the hand while rotating, and the rotation stiffness is exactly like the original.

There is a CD pattern on the three black sub-dials on the dial. There is a 30-minute chronograph counter at position 3, an independent small seconds counter at position 9, and a 12-hour chronograph counter at position 6.

The large seconds hand at 12 is used for the chronograph; It is not the second hand that shows normal time. The brightness of the hour markers has almost the same effect as the original. Since the legs of the signs are fixed, they do not come off easily.

The printing font of the logo on the dial is the same and accurate as the original; Also shiny. The Breitling logo is extremely three-dimensional; Since its thickness and size are exactly the same, it is interchangeable with the original. The hour and minute hands reflect the texture and color of the original; burr-free and extremely clean, exactly the same as the original. In addition, the three-dimensional hour markers and hands are painted with lume coating, thus ensuring the readability of the watch in general darkness. The date numerals at position 6 were made with 3D three-dimensional printing; The figures are standard and exactly centered.

316L stainless steel case, which is very popular today, is used; It is very shiny because it is processed and polished. The chronograph pushers on the side are also placed in the same position as the original. The chamfers are processed with extremely round lines, so there is no sticking in the hand.

The details of the curve, lines and chamfer corners of the case are also perfectly reflected. Workmanship is really good. The triangular groove pattern of the crown in the middle is meticulously processed; The workmanship is extremely neat, and setting the watch is very practical and effortless.

A small letter B is engraved on the top of the crown; The workmanship is extremely fine.

Once you press the button on the crown, the large seconds hand of the chronograph is activated. The large seconds hand completes one full rotation in one minute, and simultaneously the small dial at position 3 advances one small notch. When the large seconds hand runs for 1 hour, the small dial at position 6 moves one small notch; It stops when you press the button again. Then, when you press the button under the crown once, the large seconds hand returns to the zero position. The "swish" sound you hear when you turn the screwed crown in the middle downwards counterclockwise, loosen it, and then turn it upwards clockwise indicates that the installation is complete. When you pick up a new watch, winding it around 30 times usually ensures that the watch has enough energy to work. Then, when you pull the crown out one position and turn it clockwise upwards, you set the date, and when you pull the crown out to the second position and turn it downwards counterclockwise, you set the time. Once you've set it to the correct time, push the crown back, then tighten the crown by turning it clockwise upwards while pushing it in, and that's it. Attention: the date should not be set around 10 o'clock; Otherwise, the date mechanism may get stuck.

The case back has a transparent design. The inscriptions on the upper edge of the case back are clearly and distinctly engraved and are compatible with the original. It has the Dandong 7750 movement inside; The original has the b01 movement, produced by Breitling itself.

While the balance wheel is in the 7-8 direction in the original, the balance wheel in the GF is in the 11 direction. So the balance wheel has slipped a little. The fine patterns on the mechanism bridge are elegant and elaborate; The similarity rate is high. Through the transparent glass, you can see the Breitling text and elegant patterns engraved on the automatic rotor.

How is the workmanship of the replica watch manufacturer GF Factory Breitling Chronomat mechanical chronograph b01 bracelet?

The bracelet is made of stainless steel; Brushed and polished workmanship applied throughout. This bead type bracelet is also called a bullet bracelet. It looks comfortable and practical on the wrist and fits the wrist very well. The logo engraving where the buckle opens and closes is very successful; largely interchangeable with the original. The details are very well done and the polished workmanship is also extremely fine. The buckle spacings are made quite perfectly; With the double-button butterfly clasp, the buckle opens when you press the areas where the butterfly clasp is located with both hands. The inner surface of the buckle is also polished. Shortening the bracelet is done with the adjustment device.

Summary: The polishing work throughout the watch is extremely fine; The visual effect in terms of brightness is very good. At first glance, it is difficult to distinguish the real thing from the replica. If you like it, you can buy it with peace of mind. I hope this article will be useful to you. We will share more detailed disassembly, real shot review and real-replica comparison in the coming days.