Real vs. Replica Comparison: V9 Factory Cartier Pasha Series Wristwatch

The Cartier Wristwatch model is produced by V9 Factory with a solid 316L stainless steel case, standard case diameter and high-precision automatic Super Clone movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Movement and Caliber Performance

V9 Cartier Pasha series W31074M7 women's automatic mechanical movement wristwatch super clone. Each piece is molded from the original, and with its closed case back design, it is almost impossible to distinguish it from the real thing. Equipped with Cal.049 movement based on 2892 (oscillation 28800, power reserve: 40 hours). Case diameter: 35.25 mm, overall thickness: 9.5 mm (8.8 mm measured from sapphire glass to case back), 316L stainless steel, scratch-resistant sapphire glass. Reasons for preference:

1. original mold Level

➀ The original watch itself is made of stainless steel (there is no weight difference due to precious metal); ➁ Closed case back design (the mechanism is not visible; even if the case is opened, the structure is almost the same, the original uses ETA2892, the V9 uses Seagull 2892 (can also be upgraded to ETA2892 if desired)); 3. Each part is molded from the original, accessories are basically compatible with the original; When placed side by side, it is difficult to distinguish which is real.

2. Mechanism Stability

Each Seagull 2892 movement is QC data tested followed by simulator testing; It is shipped after a reasonable margin of error is provided and the mechanism has a lifetime warranty. If your budget allows, you can also upgrade to the same ETA2892 movement as the original for an additional fee.

3. Full of Pleasure

What is niche is also high-end. You will often see Ballon Bleu and Tank in public places or events; These are already boring or have become ordinary. However, Pasha has a unique style and fully reflects the independent character of a successful woman. The crown protection cover with chain adds an elegant and noble atmosphere and evokes a feeling of deep and mysterious beauty; With its textured appearance, the bracelet is a delight to watch.

V9's work is the best. V9 considers the buyer's pocket; delivers the best product with as few or no upgrades as possible; A truly modest factory. Just a quick reminder: Every V9 watch has a factory anti-counterfeiting chip in the box; Thanks to this chip, it can be verified remotely whether the watch left the factory or not. In this way, malicious sellers are prevented from selling low-quality products as if they were high-quality, and the buyer can shop with peace of mind.

The number of parts of the watch is exactly the same as the original; neither more nor less. From large parts such as case, case back, middle cover and dial; It is all the same as the original, down to small parts such as various screws, mechanism fixing plates and belt screws. Moreover, it is compatible with the original and can be replaced with original parts. The strap structure is the same as the original and all metal parts of the watch are 316L steel.

Dial and Hand Details

The location of the date window on the dial surface, the small minute counter, the general arrangement of Arabic numerals and English inscriptions are in line with the original. The size of the date window is the same, the font also matches the original; The date disc has a glossy surface, the date printing is clear and there is no bleed, but the text thickness is slightly thinner than the original. Cartier's English brand lettering and the English phrase for automatic mechanics are printed without burrs and smooth, looking clear and dimensional; The font is slightly thicker than the original. The style of the Arabic numeral hour markers is the same, and the details are well-done; The thickness and size are almost exactly the same, the paint filling is clear and there is no overflow.

Case and Body Workmanship

The middle case form does not show much difference when compared from every angle, the appearance is exactly the same. The details on the crown area and lug section of the middle case are also machined on site, there is no difference in workmanship. The form of the case back is the same as the original; In addition, the style, thickness and depth of the engraved writings are the same as the original. Since the original was used, the engravings have accumulated dirt inside, which is why they look black. The inner cover, frame and waterproof seal are the same as the original; The workmanship fully complies with the original production standard. Can be replaced with original parts.

The general texture, length and size of the hour and minute hands are almost exactly the same. The hour and minute hands are blued steel, the same as the original; It looks very stylish and the overall texture feel is quite close to the original. The needle surface is polished, the tips are smooth and rounded (not with straight cut tips like on the market), the lume filling in each needle is equal. The center shaft of the hands is the same size as the original, the edges are polished. The center shaft looks a little dirty as the original came out of the mold.

There is almost no difference in the structure of the crown protection cover; The polishing and processing effect of the metal is exactly the same. The clearance and opening size of the crown match the original. The style and structure of the crown are the same as the original; Two waterproof seals surround the installation tube in the same way. There is no big difference in the length of the winding tube, but there is still a small difference in terms of structure.

Glass and Sapphire Crystal

As seen in the size comparison, the diameter is 35.25 mm in both, the thickness is 9.5 mm in both; The measurements are very good, no problems! The height of the sapphire glass case back is 8.8 mm on both.

Strap, Buckle and Comfort

When the front and back sides of the strap and buckle are compared on a flat surface, it can be seen that the structure is exactly the same; The polishing and processing effect is very good, the material is 316L stainless steel on both. The same triangular cutting process was applied at the point where the strap connects to the ear. This is Cartier's very classic H-type bracelet; The same brushed treatment has been applied to the bracelet, the size and shape are exactly the same as the original. Chamfering and machining has been applied to all edges of each link; The V9's chamfering looks a bit more rounded.

Again, sapphire glass is used (not plastic glass or ordinary glass like on the market). Scratch resistant and long lasting; Additionally, the glass is extremely clear, making it easier to read. When viewed from different angles, it appears that there is no strong reflection in the glass. In measurements made with various test devices, it is determined that the Mohs hardness value of the glass is above 8 and close to 10. The hardness of sapphire is second only to diamond; The hardness of diamond is 10. The original uses the eta2892 movement, while the V9 uses the Seagull 2892 movement. The determination and nature of the two are close to each other; This watch has a closed case back, it is difficult to distinguish a real one from a replica without opening the case and looking at the mechanism. If you have higher expectations, V9 also offers an upgrade to eta2892; However, we should point out that this is an additional fee.

I hope my article helped you.