Real-replica comparison: Does the chocolate-coloured model with the N Factory Rolex Daytona 4130 movement give you away at a glance?

The Rolex Daytona model is produced by Noob Factory with a solid stainless steel case, standard case diameter and 7750 automatic chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Below is the real-replica comparative review of the N Factory Rolex Cosmograph Daytona 116515.

General comparison: original on the left, NOOB Factory on the right.

Movement comparison: 4130 one-piece movement

In two years of work, large amounts of money were spent and CNC equipment was purchased to mold the original mechanism; Thus, running-in of each bearing and gear was ensured with the lowest friction. A true one-piece mechanism; not a single extra plate or fake gear. This ensures that the case is not too thick.

Just like the original, a KIF shock absorber was used and the same blue mainspring was preferred; It has high resistance to magnetism and impact.

Although the model engravings on the mechanism plate are not as deep as the original, they are distinct and finely processed. The patterns on the mechanism are also extremely meticulous; It is different from the rough workmanship of ordinary versions.

The workmanship of the three small meters is quite close to the original; It is almost unnoticeable to the naked eye. Although the workmanship of the hour and minute hands is a step behind the original, the writing and pattern workmanship is on par with the original; The filling paint of the writings is clear and burr-free.

The dial color is very close to the original, both are chocolate color. If you look carefully, the color is slightly darker than the original.

When the radial pattern of the dial is magnified tenfold, there is still a difference compared to the original, but it is not noticeable when viewed from a normal social distance. The edge processing, lume filling and dimensions of the hour markers are the same as the original; however, their colors are slightly different compared to the precious metal hour markers of the original.

The workmanship of the crown logo is really good compared to the original, it is quite three-dimensional.

The size and style of the writings on the dial surface are the same as the original, and the printing filler paint is also very nice; There are no bleed edges, the overall workmanship is really good.

The diameter is the same as the original, they are both 40 millimeters.

Its thickness is the same as the original, both are 12.3 mm.

The tachymeter ring on the bezel is exactly compatible with the original and can be replaced with the original. There is no difference in the overall appearance in terms of workmanship; The size of the hour markers on the bezel and the spaces between the texts are also the same as the original.

Physical vapor deposition (PVD) technique was used on the markings on the bezel; Colorful paint coated on the writings at high temperature. The thickness of the tachymeter markings on the bezel completely matches the original and their color does not fade.

The workmanship of the hour and minute hands of the three small counters is close to the original; The needle hubs are solid, not hollow like in ordinary versions. However, there is a difference compared to the original; needle hubs are smaller compared to the original.

The middle of the needle hub is filled as in the original. (Many appraisers give false judgment because the needle hub is hollow.)

The black fill paint and lume fill of the hour and minute hands are as smooth and even as the original, with no bleed. In addition, the craftsmanship, size and length of each hand are the same as the original and can be replaced with the original.

The glass is extremely clear; No matter which angle you look at the dial from, there is no reflection. When looking at the inner case engraving from four different oblique angles, the size of the engraved inscriptions are the same as the original, extremely clear; The scraped content is no different from the original. All workmanship is laser engraving.

The protrusion height of the glass is the same as the original, about 0.3 mm.

The crown laser mark under the glass is visible when viewed under strong light; The workmanship of the hidden crown laser mark is the same as the original, regular, ordered and fine.

Thanks to the advantage of making a mold from the original, the overall size, case form and curves of the case are the same as the original when viewed from the front, side, rear and rear side.

The model of the watch is engraved at the front connection point of the case and strap.

The precious metal sign on the ears, the brand corporate emblem, the Saint Bernard dog head and the scale sign are made with the same steel stamping technique as the original; three-dimensional and deep.

The end pieces on the inside of the ears are slightly larger than the original, but the edges are clean; Brushing was also applied to the inside of the ears.

The front and back curves of the ears are the same as the original, and the front surface has been carefully polished.

The strap has the same Thailand imported rubber strap as the original and can be replaced with the original.

The crown on the buckle is made with the same one-piece casting technique as the original; It was not added later with source. The crown as a whole looks clean and smooth, with polished edges.

Engraving on the inside of the buckle; The text and pattern carvings are the same as the original, but are slightly shallower than the original.

The rivet workmanship of the buckle is the same as the original, straight and smooth; There are no weld marks on the edges.

Brushing has been applied to the edges of the buckle, and it has the same thinness and texture as the original.

Summary: The NOOB Rolex Cosmograph Daytona super clone model has analyzed every part of the original movement from start to finish, creating a Cal.4130 one-piece movement that rivals the original; The similarity is extremely high, not only all functions work, but also stable and durable. The factory purchased the originals of several different models for a large sum of money and molded the parts; Thus, the case and all metal parts are compatible with the original. It is currently unrivaled in the market, one of the rare masterpieces produced by N Factory; Watch friends who like it can buy it blindly.

If you have read this far, I hope this article was useful to you.