Real-Replica Comparison: How is the Detail Workmanship of the Clean Rolex Shawn Yue Daytona?

The Rolex Daytona model is produced by Clean Factory with a solid 904L stainless steel case, 40 mm diameter and Dandong 4130 chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

The above was a brief introduction about the Shawn Yue model Daytona; Now let's get back to our topic, here is what we are comparing today:

Compared to the Clean Shawn Yue model and the original, is there a big difference between them?

Let's look at the material side first. The original is made of 18K gold material; case, buckle and crown head parts. Since the density of K gold is high, it is heavier in grams than the replica version. After all, Clean is made of 904L stainless steel material; It is not possible for a replica watch to use 18K gold, in terms of price! The K gold color tone, which we see as the same as the original, was obtained by PVD coating process and an appearance with no color difference was achieved. It is almost 95 percent perfect for 18K gold; This means a completely colorless level. It also has a three-year color fading warranty.

As for the weight gram issue, there is a solution for this: tungsten steel balance weight or 18K gold balance weight. These two options can reach the same gram value as the original. 18K gold counterweight is relatively expensive; The current new balance weight solution, tungsten steel material, is extremely close to the original weight and is also very affordable in price. When we look at the black ceramic bezel, Clean Daytona undoubtedly has the closest version compared to the original bezel; Compared to the ceramic bezels made by other factories on the market, they are not as good as Clean, you can see this by comparison. The overall fit of the bezel and the flatness of the circle are very good. The gold text of the hour markers is made with PVD coating process, there are no defects.

The gold dial is probably the detail that watch lovers care about the most. Let me tell you clearly, the only version on the market that can replicate the Shawn Yue dial most accurately is the Clean Shawn Yue model. There is no color difference in terms of both radial pattern appearance and K gold color tone! The original is not a pure 18K gold dial, it has a slightly whitish feeling. Other versions on the market thought the dial was 18K gold, resulting in incorrect workmanship; You can totally compare this point. In the comparison between the original and the Clean Shawn Yue model, it is very difficult to distinguish whether it is real or a replica.

As for the three chronograph counter part, the copied structure and the patterned table of the inner ring are made smoothly; There is almost no color difference with the black small meters. When it comes to Daytona, the thing that everyone cares about most is the chronograph function. The Clean Shawn Yue model carries the Dandong 4130 movement; It is exactly the same as the chronograph function and setting direction of the original. The power reserve is also 72 hours. Is it really 72 hours? We haven't tested it, but 65 to 70 hours is definitely enough. We do not recommend using the chronograph function too often; This is the same for the original. As a result, it tires the mechanism, causes wear and tear, and affects its lifespan in the future.

Then there are the part details inside the dial. The hour markers are surrounded by a black metal border, with slightly rounded corners; These are all very basic workmanship, not very unusual operations. Some logo inscriptions engraved on the dial are not flat, but give a three-dimensional feeling. The solid hour and minute hands and the center shaft part are also PVD coated. However, Clean Daytona's hour and minute hands are made a little too golden yellow; because the original has a matte gold hue. However, unless you compare carefully, it is difficult to notice the flaw in the hour and minute hands. The middle point of the center shaft is also very well made and has a hollow structure. Then there is the hour markers and lume fill part; Clean Rolex made the filling using original raw materials.

All required markings are present on the buckle and case back; processed completely, word for word.

As for the strap part, imported rubber material; He also improved the Clean Rolex strap, inserting memory steel into it in the same way as the original. It both increases comfort and the entire form of the watch looks good when viewed from the side.

In general, the Clean Shawn Yue model is quite flawless in terms of the processing of workmanship details and the control of the 18K gold color tone. It can approximate the original by about 95 percent. The appearance and dial color are almost the same, you can buy it with peace of mind.

I hope this article will be useful to you. We will share more detailed disassembly, real shot review and real-replica comparison in the future.