Clean Submariner Two Tone Blue Case, Steel Color Analysis

The Rolex Submariner model is produced by Clean Factory with a solid 904L stainless steel case, 40 mm diameter and ETA 2836-2 caliber in accordance with Swiss norms architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Clean is a manufacturer that many people may not have heard of. This factory used to be a parts manufacturer; The two-tone blue water phantom bezels of many major manufacturers were actually produced by Clean. Later, this factory also started making its own water ghost watches, but they did not become as famous as N Factory, AR Factory, VS Factory, ZF Factory water spirits. Still, the workmanship is extremely good, especially on the bezel, at the highest level. This time Clean has released the completely renewed V4 version two color blue water ghost. The same parts manufacturer as AR Factory was preferred for the entire case and strap. After this upgrade, we can say that the Clean two color blue water ghost has reached the same level as major manufacturers such as VS Factory and N Factory; The new bezel is the highest version on the market!

The newest version of Clean, the real clean V4, has a green bezel, and the old V3 version surpasses the green bezel by a long shot. The distinctive clean V1 edition blue bezel gives off a blue-purple tone, just like the original. Hand-crafted three-dimensional hour and minute hands, you no longer need to wear equivalent hour and minute hands. The black-green and steel-colored water ghost continues to use the AR steel bracelet. Clean two-tone steel bracelet / AR steel bracelet (unique three-piece connecting links and no steel color visible from the side). Clean high-end equivalent green dial. Clean's own developed blue dial. All 904L material (real 18k vacuum plating, free replacement if color fades). There are a total of five models introduced this time: 116610 (black/green) all-steel case water ghost; 114060 (black) undated water ghost; 116613 (black/blue) two color water ghost. As a movement, only 3135 is currently available, and the shipment date of 2836 is not yet known.

All font corrections, including the bezel, edge chamfering and more are exactly the same.

Is the Clean Rolex two-tone blue water ghost detectable as a fake at first glance?

Three-piece jointed links, which are unique to us on the market, can be clearly seen in the photo: the thin line at the joint. Yes, if the two color water ghost you have does not have this line at the back joint of the bean, I am sorry to tell you that it is not the most perfect two color water ghost you have. Three-piece crafting is actually not difficult; The main difficulty is that the parts must be produced and coated separately, the difficulty of the development process and the risk of a certain wastage rate. This meticulousness of Clean will definitely take him to the top.

All parts are coated one by one, the bracelet is not coated completely. The advantage of coating the parts one by one is that the steel color is not visible on the strap, links and sides, so the fake is not obvious at first glance. But here is the difficulty: if any defects occur during installation, they cannot be repaired, because once the coating layer is damaged, it can only be thrown away as scrap. This is Clean's attitude in producing parts: consistent from start to finish, never compromising.

Clean uses entirely 904 materials in the base cover, buckle, strap, case and all other parts. Buckle 904L steel; There are only three manufacturers on the market that make their buckles from 904 steel, and clean is one of them. As for the case and base cover, Clean is the only factory that produces 904L steel plate by pressing it with a mold alone (normally, this job is outsourced to a case factory; the case factory orders raw parts in appropriate size from the raw part factory, and the raw part factory supplies the 904L steel plate raw material. Of course, 904L also has imports and domestic products; although the composition values ​​are close to each other, the unit price of the imported material is slightly higher and the yield rate is relatively better). Clean accepts all kinds of material tests and returns it if it is found to be fake. (The case, strap and AR Factory Rolex water ghost are products of the same manufacturer; AR Factory makes the best case set and strap on the market right now.)

In short, starting from the supply of clean raw materials, it skips the raw parts factory and the case factory and does the labor itself. This has only one purpose: to guarantee that the material is real 904 imported material from start to finish, and at the same time to continuously improve the yield rate.

In the bezel of the Clean Water Ghost, we can see that the C4 bezel, which everyone accepts as the best in the market, is used, the equivalent level dial, three-dimensional hour and minute hands, and the AR bracelet, which everyone accepts as the best in the market; So all the advantages are gathered in a single product. But the mechanism is not mentioned much here. This replica 3135 movement that Clean uses is actually ZZ Factory's 3135 movement. In terms of performance, it may not be as good as the 3135 produced by VS Factory, but it does not break down either; After all, this mechanism has been tested at ZZ Factory for years, its stability is very good. Currently, such replica 3135 mechanisms are now well matured; Even if you buy a random XXX small imitation factory's 3135, it won't break. So there isn't much left to say about the mechanism.

Clean has a solid history and backing; It has been working on the replica of Rolex parts for all these years, it is a truly well-established and clean manufacturer, more reputable than other factories. That's why the Clean water ghost quickly won the favor of dealers and watch enthusiasts around; His current situation is extremely hot, comparing his watch with someone else is almost begging. But if you try to get some watch enthusiasts who do not know Clean to buy this product, it will be very difficult for them to accept it; Some have not even heard of it. Then there are the loyal fans who don't know what N Factory is; When you say Clean is good, they think 'N has no stock and that's why you are recommending Clean to me, I won't fall for this trick'. If VS starts shipping now, the course of events will return to VS's domination; No matter how well Clean does, it won't work because VS has a great reputation, plenty of production, and a large fan base. Whether one understands it or not, one can convince oneself when one says 'VS big factory'; The deal is completed without a word. Why bother explaining Clean to you at length? Moreover, even if he explains, there is no guarantee that it will be in stock. Most of the time, some factories become popular like this and become more famous, but eventually collapse due to their production capacity. If there is no sound from VS and N again, the end of the matter is really unclear; The popularity of Clean is constantly rising, and models with dark blue bezels and starch bezels will also be shipped, and their quality is not ordinary. It is really unclear who will inherit the replica Rolex world from now on.

Clean water ghost is undoubtedly the best version at this point, but this version only appeals to those who know it; unfortunately only the old wolves know. If VS didn't get caught up in monitoring, it would be the new water ghost's world right now. Of course, the classic two-tone blue spirit is still irreplaceable, and there are many potential enthusiasts, so the most popular is C two-tone blue. Judging by the customer feedback so far, the reviews are very high. I hope Clean continues this success and brings many more good products to everyone.

Clean Rolex two color blue water ghost replica watch detail review

High-end equivalent two-tone blue dial; The two-tone blue glow effect of the dial is much more realistic than before. In general, the print of the crown logo is finely processed, and its opening is in an oval shape. The inverted triangle at 12 o'clock is perfectly done, feeling centered and full. The three-dimensional hour markers and hour and minute hands on the dial are all filled with lume material; It is full but does not overflow, and it also has frame decoration. The lume point is right in the middle, the middle is protruding, the edge of the metal frame is hollow; It is neither overly plump nor does its edges turn blue over time.

The Clean Rolex two-tone blue water ghost has a diameter of 40 mm; It can be used comfortably on both large and small wrists. Side thickness 12.5mm, same as original. The lateral line of the two-tone blue water ghost is long and softly rounded. If you look carefully, you will see that the ears and triangular dimple patterned bezel of this version are exactly the same as the original. The lume effect is extremely sharp; You can easily read the time no matter how dark the environment is.

On the other side of the watch, there is a screw-down crown; The Rolex crown emblem is engraved on it, and the three dots below symbolize that the crown has a three-stage lock and a three-layer waterproof system. The crown has a non-slip dimple pattern that makes it easier for the user to adjust. The change on this side of the case is in the crown shoulder pad; Rolex has made the shoulder pad a little thinner and narrower in the new model, but frankly it is not very noticeable.

In order to protect the movement from the effects of water and dust and sand, Clean has used a three-fold locking winding crown. When tightened, the oyster case becomes completely sealed. A row of gears is also engraved on the crown; This makes it easy for the user to set the time and date, and the winding feel is extremely good. Closed base design protects the mechanism better. There are two options for Clean: Hangzhou 2836 and Seagull 3135; Both are stable and reliable. Strap type oyster three link 316L stainless steel bracelet. The solid link bracelet has undergone a very fine brushing and polishing process, and its curve fits the wrist well. There is almost no difference in color and brightness.

There is a change in the protective film in the 3135 version of the Clean two color blue water ghost; The 904 steel red text is no longer visible on the back, the 3135 laser mark is left on the bottom of the case, but the entire case is still made of 904 material. The part of the strap that fits on the wrist is also important. Its touch is silky, the hand and texture feel is first class. Basically, it is no less than similar products from AR Factory. The highest level among replica watches! Finally, the mechanism. This version uses 3135 directly, there is no 2836 version. The winding rotation direction is the same as the original; There is no longer an artificial feeling of use. Both the look and use of the watch are a perfect copy. Moreover, this movement has passed hundreds of function tests, it is stable and has no problems!

Below are the high-definition real shot photos of the Clean Rolex two-color blue water ghost replica watch; There are also real-replica comparison images later in the article.

Is it worth buying the clean two color blue water ghost?

It should be noted that the new version Clean water ghost is the only water ghost replica version on the market with solid lume material inside the dial, and its workmanship has matured considerably. Water ghost competition is very heated now, many factories produce; Clean's ability to stand out among these is an indication of its true power. The Clean version water ghost's in-dial lume material has undergone full 69 nail processing; Only this version can make the dial almost invisible and perfectly approach the original.

The cost of the outer bezel of the Clean two-tone blue water ghost is quite high. The bezel is platinum filled and has a very strong grip. Basically, it does not flake over time, it does not oxidize and turn two colors blue. Even though this factory does not produce much and has not been on the market for a long time, many of its products are truly admirable! A very important point is the processing: whether dated or undated version, clean's replica products achieve the solid lume effect; in both 2836 and 3135 versions. The entire watch is made of pure 904 steel. If you purchased another version made of this steel, you can clearly compare the difference.

On the movement side, the most common caliber 3135 on the market and the Seagull caliber 2836 are used; The mechanism has been tested for years, its performance is good and the failure rate is extremely low!

For straps and buckles, Clean uses the same parts manufacturer as AR Factory; The highest-end version on the market. While a few factories attach labels to 316 steel and sell it as if it is real, Clean produces a product that is actually high in hardness and density, and resistant to corrosion and scratches. The fine processing of the locking mechanism on the inside of the buckle and the opening-closing feeling are much cleaner and more perfect (as soon as you hold it, you feel the strong visual impact and texture of real 'imported 904 steel'). The shape and size of the 'crown emblem' on the buckle are perfectly corrected, identical to the original; Its processing is smooth and fine, there is no feeling of indentation or protrusion, it is in the same range as the original and opens easily, it does not feel difficult to nail.

The most successful aspect of Clean is its decoration; Especially after being upgraded to the V4 version this time, it far surpasses all versions on the market.

Clean Rolex two color blue water ghost replica watch V4 bezel comparison with the original.

High-end equivalent two-tone blue dial; The two-tone blue glow effect of the dial is much more realistic than before. In general, the print of the crown logo is finely processed, and its opening is in an oval shape. The inverted triangle at 12 o'clock is perfectly done, feeling centered and full. The three-dimensional hour markers and hour and minute hands on the dial are all filled with lume material; It is full but does not overflow, and it also has frame decoration. The lume point is right in the middle, the middle is protruding, the edge of the metal frame is hollow; It is neither overly plump nor does its edges turn blue over time.

This time, Clean removed and molded the original two-tone blue spirit to produce a better replacement part. You can see that the font printing is done in perfect letter shape and thickness. The sun patterned texture spreading outward from the central hole is also extremely close to the original; It is finely processed but does not catch the eye.

Two color blue water ghost has been around for so many years; Factories large and small carefully processed every detail, but the effect of this single date window was always the most inconspicuous. I managed to clean the matte date window, but unfortunately even though the effect has been removed, the detail part still needs to be corrected. I hope that the appearance of the date window will be made more consistent in the future.

Hand-crafted three-dimensional hour and minute hands, you no longer need to wear equivalent hour and minute hands.

C bezel with high transparency, three-dimensional hour and minute hands with solid center axis, stick engraving.

Complete upgrade of the Clean Rolex two-tone blue water ghost case set; It is literally made of imported 904 steel and uses the same parts manufacturer as AR Factory (AR Factory is the manufacturer that makes the version closest to the original in the market for the case set and strap). The details of the internal structure of the case, as well as the external appearance, the brushing processing of the strap and the case... The current texture and hand feeling are extremely excellent; The brushing and polishing of the entire watch is dazzling, a perfect replica of the classic original.

Generally speaking, Clean's launched water ghost and GMT have gained a solid foothold in the Zhanxi market. The overall watch belongs to the high-end replica version, whether in terms of workmanship detail or lifelikeness. Undoubtedly the best alternative after VS. It is recommended.

I hope this article helps you. We will share more detailed part reviews, real shot evaluations and real-replica comparisons in the future.