Has Clean Rolex Daytona reached its peak with the n4130 movement?

The Rolex Daytona model is produced by Clean Factory with a high-tech ceramic case, standard case diameter and Dandong 4130 chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Clean is essentially a factory that comes from accessory manufacturing; The ceramic bezels of the Submariner and GMT series always come from this factory, and many large factories also source their supplies from it. A buff, a so-called equivalent needle, is used on the hour and minute hands. Ar accessory was used on the strap; He says that they have now found AR's contract manufacturer to have the Clean belts made, including the Submariner belt.

Let's measure directly with caliper; The bezel diameter is 38.5 mm, the same as the original. Thickness is 12.4mm with Doraemon sticker on it; 12.3 mm after removing the sticker.

This thickness is the same as the original, so there is no need to bother with embedding the sapphire glass; The glass was already embedded at the factory. This height is also made the same as the original, so the entire thickness of the watch is 12.3 mm; still to the same extent.

As for me, I also carefully compared all the details; The brushed and polished workmanship of the strap, the position of the wide opening part of the buckle, the chamfering, the buckle code, they actually found AR's contract manufacturer in all the details. So this strap is exactly the same as the ar, so there is no need to upgrade to the ar steel bracelet anymore.

They have made everything ready and fully equipped for you; It's like they gathered all the good parts together and compiled them into one finished watch, and you don't have to modify it, it's already modified for you at the factory. This is also a point that saves you money; but the price is slightly higher. Think about it, before, the costs of changing the C bezel in the N Factory, replacing the equivalent needle, and installing the AR Factory steel bracelet were all quite expensive. Look, it already has this steel bracelet on for you when it leaves the factory; Moreover, AR Factory had this done by the accessory side. If you put an AR Factory steel bracelet on an N Factory case, the end rings will be a little loose; Clean's bracelet is very tight and the fit is very high. The strap machining is extremely accurate; The buckle has also been chamfered, the inside of the buckle is clean, there is no punctuation mark, the buckle code is the same as 7CD and AR, the additional steel bracelet is also the same.

Then let's look at the dial. There is no color difference on this white dial; The size of the three small sub-dials inside is also the same as the original. The lume filling on the dial surface is exactly the same, the center shaft is full, the middle is not empty from end to end. The tip of the hour and minute hands is quite pointed and the same, slightly thicker; It's not tinny (that is, it's both thin and has rough edges, lots of burrs) like the N Factory ones. There are no burrs in Clean, so it is much better than the N factory in terms of quality control across the dial.

Additionally, the edge of the sapphire glass is very clear; It's no longer like that surrounding white ring.

As for the chronograph function, it goes without saying; It has the Dandong 4130 movement inside, just like the N factory, so its functions are exactly the same. When you pull the crown, there is only one step for setting the time; It is turned clockwise and works clockwise. If it were a 7750 movement, they could also make it a single stage in the market, but it works counterclockwise; Therefore, it can be distinguished whether it is a 4130 mechanism or not in terms of adjustment. Additionally, the feeling in your hand becomes a little lighter when winding.

Let's take a look at the black ceramic Daytona; The workmanship is the same as the panda Daytona. However, in my personal opinion, it would be better for these three small secondary dials to be a little whiter, with a silver-grayish tone. Let's also look at the internal codes under the dial; Each watch's code is different. Its workmanship is the same as the white panda Daytona.

The movement inside is the Dandong-made caliber 4130 that we all know very well; these are from the same factory as N Factory, so their stability is also the same. There is only one difference, but where is the difference? There is a slight difference in the engraved text on the mechanism. The N factory was printing the Rolex logo before it left the factory, and N Factory's is a little fainter; In clean, this is scraped afterwards. So when they take the mechanism back, it is empty, there is no engraving; Clean prints this later, so its engraving is deeper and slightly thicker. This point is slightly different from the N factory, the rest is exactly the same. This mechanism is extremely stable and durable; It's been three years since N Factory released it, the failure/repair rate is really low. It really can compete with the current ETA 7750; The work is stable, the margin of error is low, it's really good. When Clean is officially released, it will slightly suppress the price previously inflated by N Factory; Once it's out, N Factory price gouging will collapse. This way, more watch lovers will be able to use good watches for less money. This Daytona is really good, so this 4130 movement from Clean is also worth buying. Since it has just started shipping, the quantity may be a little less.

Finally, let me sum it up for you. This Clean 4130 Daytona; It uses a C bezel, C dial, buff hour and minute hands, AR Factory steel bracelet and N Factory 4130 movement. Its stability is extremely good, it is truly fully equipped from the factory, it has a sapphire glass embedded on it and its thickness is the same as the original. You don't need to make any extra modifications to it when you get it. So this Clean 4130 Daytona is a good choice.

I hope this article was useful to you. Feel free to follow the site more closely if you're interested; I'll be sharing more detailed teardowns, live-action reviews, and real-replica comparisons in the future.

Clean panda Daytona 4130 movement high resolution real shot images