Rolex Daytona 116509 Clean Factory Review

The Rolex Daytona 116509 model is produced by Clean Factory with a solid stainless steel case, standard case diameter and 7750 automatic chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Clean Clean Rolex white gold Daytona consignment 116509, white gold cement gray / white gold red devil
1. Three-piece split crown piece
2. The protrusion of the crown part is exactly the same as the original
3. The side surface of the crown part is polished, the only example on the market that matches the version exactly
4. We have previously shot the real-replica comparison of the cement gray dial surface
5. The red devil dial surface has been improved based on the original, matte black surface
6. Some uninformed customers criticize the writing ring of the bezel, here I would like to emphasize: you can compare it with the most up-to-date original; font size, flatness, bezel outline. Note: even on a single side face, three edges intersect, it is polished and the surface line where the edges intersect is extremely clear. Most factories cannot do this, they remove it as a huge round corner.
7. The bezel lettering is matte finished, and the oil filling here is extremely meticulous.
If there are any problems expressed by the customer, we fix them, if not, we work even more carefully. But we don't want the customer to not understand the details of the manufacturer's efforts.

Case and Body Workmanship

Dimensions were measured with calipers; We only measured the bezel, around 38.5. I also measured the thickness, it was 12.1 mm at its thickest part. I weighed the entire watch, it weighs 143 grams. It will be much lighter than the original, because in this model of the original the case and strap are 18K white gold; The original is probably around 208 grams, this one doesn't even weigh 143 grams, so the weight is quite light. But 904 steel is used here, which does not discolour.

Let's take a look at the bezel, finally this bezel has been fixed. I said in my previous review: the number 60 used to be more centered, including this point at the top.

On the white gold bezel, it was a little close to the edge of the glass; Now the middle part has been corrected, it has become a little thinner. In the past, this used to be more centered. Here is a point of the bezel that has been corrected, you can see from the inverted triangle here, it has moved a little more inwards.

The red in the glass is also extremely vibrant. We can look at it from several perspectives; We see that the second hand is very vibrant and very red, and the hour and minute hands have a solid center shaft. It's also well done in terms of oiliness, the numbers here are pretty bright too. There is also a three-dimensional feeling. The overall texture is much better than the previous N Factory work, and it is much more comfortable to look at; Moreover, there is a certain improvement in printing and every other aspect compared to the previous N Factory work. Most importantly, the hour and minute hands: In the N Factory work, it was a very pale red, it did not have that oily red. The original has a very vibrant red, which is what Clean captured. These are all highlights.

Let's also look at the safe. In this white gold case of the original, the curve is slightly more curved, so the tip of the steel bracelet protrudes slightly from there; The steel bracelet is seen to be slightly protruding from here to there, the original is the same way. There is no protrusion at the top
only at the tip. It is made exactly the same as the original, with a slight curve.

When you look at the entire clock through the glass, it is very clear; There is no need to collapse the glass on the edge, the glass is slightly higher in the original.

Let's also look at the functions. When you pull it, the time is set, in the middle stage, when you push it back, it will automatically set, tighten the crown. It starts and stops when you press the first button at the top; The third is reset. The minute chronograph zone at 3 o'clock is the hour chronograph zone at 9 o'clock. There is a normally functioning small seconds hand at 6 o'clock, while the large seconds hand is used for the chronograph.

The use of all these functions is the same as the original, only the weight is slightly lighter. It is a replica wristwatch that is very faithful to the original. If you like it, you can buy it.

There is another new pattern on the back: Sun Wukong (Monkey King). Look at the engraving there, it's etched very deeply, these steel prints are all very deep. The fit of the joints of the steel bracelet is also extremely good.

Let's look at the workmanship of the steel bracelet. The buckle has chamfering and gaps; The closing feeling of the buckle is also extremely well made. Let's open it up and look at the codes here: 750 sign, the code here is rhd. The one on the back is also 750; Fidelity to the original is also quite high.

I hope the articles will be useful to you. I will share more detailed disassembly, real shot review and real-replica comparison in the following sections.