How are the workmanship details of Clean Daytona white steel 116520?

The Rolex Daytona 116520 model is produced by Clean Factory with a high-tech ceramic case, standard case diameter and Dandong 4130 chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Let's look at the workmanship details. First, let's make a brief comparison with the Panda Daytona. When we look directly at the white steel Daytona and the Panda Daytona, the biggest difference is in the bezel. While the Panda Daytona has a ceramic bezel, the white steel Daytona has a steel bezel and the hour markers are directly on this steel bezel. There is also a little difference in the dial surface. The Panda Daytona has these three small secondary dials in black, while the white steel Daytona has this CD pattern in silver and tinges to a light golden yellow, a light golden yellow. In other words, the dial surface is made extremely true to the original, and this color is even more accurate than Panda Daytona.

Dial and Hand Details

The hour markers on the dial surface are really impressive. The processing of each bar sign, the processing of the side surfaces and the curve processing are really successful. So is its brightness; It also has white gold plated work on it, so it looks extremely shiny from any angle when held up to the sun. There are no burrs on the buff hour and minute hands, they are very well machined. It also has a bit of a stick-like feel, and its three-dimensionality is pretty good. This hour and minute hands are slightly lower than the Panda Daytona, so there is no need to change the hour and minute hands, change the dial, or replace the glass. This sapphire glass is also made the same as the original; The Panda is slightly more protruding than the Daytona, which is in keeping with the original, because the original white steel Daytona's windshield is also slightly protruding. The edges are also made with this round curved processing; The edge is not a single cut, it's made with a little bit of this circular curved processing.

There are no obvious spots on the entire front face. Including hour markers on the bezel. If you look at these bezel hour markers, they are made very thick and very deep. It is better in workmanship than previous N Factory products and other mixed factories that we will not mention. The color is also very accurate. So is the crown; The length of the part coming out is exactly the same. Lume is also made according to the original. The text printing was also done with this oil printing method, its three-dimensionality is quite good. The center shaft is also a solid shaft and it is made very true to the original.

Strap, Buckle and Comfort

As for the strap, it is still the same as before: the strap from the AR factory. All chamfers have gone through this process; Let's take a look at the detail work inside. This place is matte and the engraving is very deep, this side is the same, then there is the 7CD code. There are these two points here. The hand feel of the strap is really good, including the sound. It is the highest level belt currently available. It is also extremely clean inside. Now let's take a look at this black steel Daytona. Everything else is the same except the color inside is different. So, in these two color options, see which color you personally like; Their workmanship is also the same. This CD pattern is also quite bright. The hour and minute hands are also very accurate in every respect.

Movement and Caliber Performance

Finally, let me tell you how to distinguish between 4130 and 7750 movements, and let's see how to do it. Normally, when winding, you pull the crown out and turn it up. In other words, you pull one step out for installation, there is no empty step, you can adjust the time in one step. If it rotates clockwise when you turn the crown upwards, this is the 4130 movement. Nowadays, many 7750 movements in the market can also make single stage and make it that thin, but the installation direction is definitely different. This is a simple method to understand whether it is a 4130 movement or not without opening the case cover.
I hope this article was useful to you. We will share more detailed disassembly, real shot review and real-replica comparison in the future.