How to set time and date on Breitling Avenger mechanical chronograph (6-hand watch)

The Breitling Wristwatch model is produced by the leading Super Clone manufacturer workshops with a solid stainless steel case, standard case diameter and high-precision automatic Super Clone mechanism architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Below I will briefly explain the functions of chronograph model watches.

Clock and setting

We usually abbreviate our chronograph mechanical watches as 6-hand watches because they have 6 hands on them. Reading the time is not the same as in three-hand watches, because the second hand of the time is located on the small dial at the top. The longest and thinnest chronograph seconds hand (as shown in the picture) does not indicate time. Stop the hand as much as possible when not using the chronograph; Keeping the chronograph on for a long period of time, over 24 hours, may cause a lack of power, causing the time to drift or the gears to wear out; This also applies to original watches. When buying a replica watch, many people say that this place is like this and that place is like this; whereas sometimes the original behaves the same way. Therefore, when buying a replica watch, do not set your expectations higher than the original!

Setting the clock is also a technical task; If you make one wrong move, you can cause unnecessary harm not only to the watch but also to yourself. As we all know, mechanical watches work by rotating N large and small gears; Failing a single gear affects the entire mechanical watch. So be sure to read the following carefully and repeatedly.

First of all, let's talk about the date, because setting the date is a step where many people often make mistakes. The watch only shows 12 hours in one round; Many people cannot distinguish whether it is 12:00 or 00:00. In cases where you cannot distinguish, let us determine this ourselves.

1. Turn the crown downwards so that it releases itself, then pull it to the first stage (most have 2 stages, each stage is very light, you have to catch it by feel).

2. Turn the crown down and turn the hour hand to 12 o'clock clockwise

3. Notice if the date changes as it approaches 12; If it changes, it is 00:00 at night; if not, it is 12:00 noon.

Date setting

The date setting is also extremely important; If you change the date setting, this will damage the gears and the degree of damage will be quite high. When setting the date, the time must be 17:00 in the afternoon; Adjusting the watch while it is preparing to change the date is strictly prohibited. In this case, the damage rate is one hundred percent. The time period when the date is ready to change varies depending on the model, but is around 21:00 and 02:00 at night. Adjusting the date while the date is changing is all about being stubborn with the gears; Since I explained above how to distinguish the time interval, I do not repeat it here. So what to do if history is set to change and the date is wrong? Let me explain below.

1. In mechanical watches with screw-down crowns, first loosen the crown downwards until it comes out on its own.

2. Pull it to the first stage (usually there are two stages, the stages are very close to each other, you must do it by feeling).

3. Turn up to the date you want (the hour hand must be around 17:00 in the afternoon).

The date setting varies by time; In some models, it is push-buttoned with a button on the side, advancing one day with each press. The setting for this is made at 17:00 in the afternoon! In most basic mechanical watches, adjustment is made from the crown.

Dial and Hand Details

If you cannot distinguish which hand is the time hand and which is the chronograph hand on chronograph mechanical watches, the way to do this is actually very simple.

1. Press the chronograph button once (it must run for 30 seconds; the moving hand is the chronograph minute hand).

2. Aynı butona tekrar basmak durdurur

3. Finally, return the chronograph minute hand to its original position by pressing the reset button below.

4. Then set the time to the original time setting; That moving hand is the minute hand of time.

The minute hand is sometimes located on the small dial with the number 12; In some models, it is on the small dial at positions such as 9, 6, 3. You can distinguish where the second hand is with this method. Do not make mistakes, you can easily damage the dial gears! That's it for now.