The price of the BBR Factory Richard Mille RM055 V3 upgraded version is really very attractive!

Richard Mille RM055 RM055 model is produced by BBR Factory with carbon fiber and Carbotech case, standard case diameter and Miyota 9015 high frequency movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

First, let's look at the manufacturer's statement: BBR: 2024 new innovation! V3 upgraded version, Richard RM055 with double mainspring box (super deal). The original one-piece double mainspring box integrated mechanism has been redeveloped, its quality is even more stable!

1. Safe

The exact same white ceramic case as the original is used. The chamfer details of the case have been reduced and made completely compatible with the original; The light passage section on the back of the case has been reduced in size, and only the glass light passage section has been adjusted to protrude. The details are also one of the most faithful versions to the original right now! A few details have been upgraded to make it more similar to the original product.

2. Mechanism

The original RMUL2 integrated mechanism has been redeveloped. The balance wheel of the double mainspring mechanism is clearly visible and moving. Say goodbye to mechanisms with bridge plates that are obviously fake at first glance!

3. Case diameter:Dimensions same as original, 49.90 X 42.70 mm; The thickness is 13.5 mm.

4. Glass material:Sapphire crystal glass, bi-directional anti-reflective coating.

5. Strap material:Natural rubber strap!

6. Clasp:The newest edition folding buckle of the original.

Workmanship details review of BBR Factory Richard RM055 V3 version

Now let's introduce this BBR Factory 055, which has the highest price-performance. This is actually considered a V3 release. If we consider the entire ranking of the 055 in the replica market, we can see this model as V4. The oldest was ZF Factory production; In that case, the balance wheel in the lower right corner was not moving, so it is considered V1-V2. In the early period, they also released an 8 series movement, which they made by modifying the Japanese Miyota movement. The early versions didn't have four holes at the bottom, right? But there are four holes here. We will see that a red diamond is pasted on the balance wheel; There is a red diamond on the shock absorber, this is considered BBR's V1. In V2, this turned into a white diamond and four holes were added, and this is V2. This model is a V3. Going from V2 to V3 is a huge leap. V1-V2 was a modification of the Japanese movement and many things were not correct; But when you look at it from 10 meters away, that is, from social distance, you couldn't notice it, but when you got a little closer, it was immediately obvious that it was fake. This current V3 version is a huge leap forward; It is now extremely impressive even for professionals. So why do we say the price-performance is so high? Because a while ago, last year, this mechanism, often called RMUL2, was being released outside. In fact, these were movements that leaked from the factory, were released during the development process, and the XXX was sold. However, this was actually the mechanism of the BBR Factory V3 version. Now it has hit the market in large quantities and is being sold for around 3-4 thousand. The water of this business is really deep, isn't it? One way or another, some people can find one of these and try it by installing the case first, which is also reasonable.

Where is the most important upgrade of the BBR Factory Richard Mille RM055 V3?

First, we see that this dot at position 6 aligns with the dot on the bridge; There is a more openwork appearance as a whole. There is also a mechanism that stops the seconds when the crown is pulled out; Previous V1-V2 versions had no stop seconds, so this one is more similar to the original. Openwork workmanship in general; Look at position 2, do you see that section is also emptied? Double mainspring, so when we do direct winding we can see a lot of things, a lot of the gears are turning normally, right? Look at the top left corner, this is also extremely impressive. It is also worth noting that this is a manually wound movement. So you wind it every time you go out, you spin it twenty or thirty times, it lasts for a day; The difference is right here. Actually, there isn't much to say about this watch, it's still a toy; but now the price-performance is very high. In fact, the main meaning of this watch today is that it is more of a modification material. This mechanism can be disassembled and modified by attaching it to other watches, or a CNC inner frame, CNC outer frame, carbon fiber case can be made; All of these can be modified.

Is BBR Factory Richard Mille RM055 V3 worth buying?

Also, this watch actually has a flaw. Compared to the V2 version, the white diamond on the middle shock absorber appears in metallic color. But this white diamond can be replaced later, replaced with a better one; The cost is not high, it is quite cheap. Sapphire glass is used throughout the watch. So why doesn't my sapphire crystal have a blue coating on it? Sapphire glass does not necessarily have a blue coating; Some watches do not have blue coating anyway. For example, AP series, AP 15500, the original does not have the blue coating anyway; Wouldn't it be even more fake if it was made with a blue coating? But this does not mean that the glass is not sapphire. What I really want to emphasize is that this watch has high price-performance. Currently, the models are quite diverse: there are black ceramic, white ceramic, carbon fiber and various strap options. Additionally, a canvas strap is given as a gift in the current campaign.
I hope this article helps you. We will share more detailed teardowns, live footage reviews, and real-replica comparisons in the future.