BBF Factory Hublot Tattoo 2nd Generation ceramic wristwatch review

The Hublot Wristwatch model is produced by the leading Super Clone manufacturer workshops with a high-tech ceramic case, standard case diameter and 7750 automatic chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

On the material side, ceramic design was preferred. Of course, compared to the stainless steel plated models previously released on the replica market, the fidelity rate to the original is much higher. At the same time, 45/17 thickness was used in the measurements of the watch; In this form, it is suitable for the usage habits of friends who love watches with large dials. Of course, this watch is a limited production; The original is a new model released around 2020. Nowadays, the possibility of acquiring the original Tattoo 2nd generation is not very high, after all, the hours are limited. Perhaps this mold work by BBF Factory can satisfy the passion of friends who like this watch for once. Also, this watch has three colors: black ceramic, white and blue. Up to 12 ceramic pieces were used in the case; these are processed through polishing, satining, slicing, carving, chamfering and faceting, creating alternately overlapping hexagonal, rhombus and triangular forms, creating a harmonious, fascinating visual effect.

As for the Tattoo 2nd generation, the overall design of this watch has a very geometric and three-dimensional feel. Many watch lovers find this watch very complicated, but in fact it is no different from an ordinary chronograph watch; It has a pretty standard chronograph counter layout. Only this time, details of the watch such as chronograph counters or seconds hand are processed in a more three-dimensional pattern. Of course, this style is also extremely nice and perfectly matches the general geometric atmosphere of the watch. On the other hand, the sides of the glass surface have a cut texture and are in harmony with the bezel details; This style also increases the three-dimensionality considerably. In addition, a sapphire glass design with high transparency is used on the glass surface of the watch. In fact, the glass detail of this watch is both a point of attraction and a challenge; because it is necessary to both guarantee transparency and ensure that the glass does not break. I can say that the production efficiency of this watch will definitely decrease significantly, because the survival rate will not be high! Just like the bezel of Blancpain Fifty Fathoms, the difficulty is quite high!

In addition, the entire clock is fixed with screws; This adds a mechanical feel to the watch. This mechanical feel fits well with the overall geometric and three-dimensional style. Note one point here: As the number of screws in the watch increases in the future, you should acquire the habit of self-checking during use and check the screws regularly, especially the screws on the back. The screw style of AP and this watch are very similar, so it is necessary to acquire this watch maintenance habit. On the right side, there are classic chronograph pushers and a recessed crown in the middle. Setting the time and using the chronograph is the same as other ordinary chronograph watches, it is not complicated at all! Of course, during the later use of chronograph watches, it is necessary to use these functions as little as possible and not to increase the load on the mechanism; This is one of the correct ways to use chronograph watches!

Dial and Hand Details

As for the dial surface, the classic geometric style gives the watch a dynamic power. This watch is also a chronograph watch; There is a chronograph counter at position 3 and a seconds hand at position 9. The thinnest hand is the chronograph hand, and the geometric rhombus-shaped hands are the hour and minute hands of the watch. Although this watch looks complicated, it is actually a simple chronograph; Only a geometric atmosphere has been added to these details. Perhaps that's the beauty of this watch's style. There is also a date window at position 5. The detail on the hands of the watch is also very advantageous; The hands are produced with a brushed design, and of course, this coincides with the geometric atmosphere, giving the watch a dynamic power. The gear side of the watch is also very three-dimensional and synchronized in terms of function!

As for the back, the ceramic style is used here too. Of course, the writings on the back are not ordinary prints, but have relief carving details; It is very successful in terms of detail. In addition, sapphire style was used on the back glass surface, increasing the transparency of the watch and making it easier to observe the operation of the mechanism. The automatic rotor of the mechanism is also processed as a geometric form and harmonized with the general structure of the watch. It carries Hublot's special production UNICO HUB 1240 automatic flyback chronograph movement as standard; It features an industry-only, faithful skeleton date ring and window at 4.5 positions, a 60-minute chronograph counter at 3 positions (note: all 7750 movements on the market can only measure 30 minutes), a horizontal clutch at 8 positions, and a small seconds wheel at 9 positions.

Strap, Buckle and Comfort

The strap side is also an attraction point of this watch. This time, the watch comes with a quick-release strap; Simply pressing the triangular form on the front is enough to easily remove the strap. This makes it very easy to clean the belt during later use. Since it is a rubber strap, it is also very practical to clean in the future. The texture of the watch strap is also very good, it is very comfortable on the wrist. As for the case, this time the watch uses a plated buckle; A very plump and classic snap buckle. It is also very practical to wear!