Jaeger-LeCoultre

APS Factory Jaeger-LeCoultre Master Ultra Thin two and a half hands classic watch 39 mm workmanship review

@Jaeger-LeCoultre · 6 Şubat 2025

Jaeger-LeCoultre APS Factory İncelemesi - Ön Görünüm ve Kasa Tasarımı

The Jaeger-LeCoultre Wristwatch model is produced by APS Factory with a solid stainless steel case, standard case diameter and Miyota 9015 high frequency movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Case and Body Workmanship

In terms of appearance, the case is very close to the moon phase model, and the mechanism is also similar; Both of them use one-piece movements, they are not converted from the 9015 movement. APS uses the 896 caliber in this model. It is the same as the original in terms of functions. The writings and other details are just right. Again, all of the new models have quick-disconnect straps; In the original, crocodile leather is used, in this model of APS, calf leather. If you are meticulous about the strap, you can replace it with crocodile leather, thus achieving the same look as the original. The buckles are a new model folding buckle; You pull it like this and close it. All of these are very original.

APS Factory Jaeger-LeCoultre Master Ultra Thin iki buçuk ibreli klasik saat 39 mm işçilik incelemesi - Kadran Detayı ve Bezel İşçiliği
APS Factory Jaeger-LeCoultre Master Ultra Thin iki buçuk ibreli klasik saat 39 mm işçilik incelemesi - Kasa Profili ve Kurma Kolu İncelemesi

The function part is quite simple. When you pull the crown, there is only one stage, there is no empty stage for date setting. This is a good point. Above the six o'clock position there is a small seconds dial; Since a single piece movement is used, this is much better than the 9015 movements used in the past. In the 9015 movement, the entire position was slightly higher and there was no distance between the two sides. In this model, it is made exactly the same; With the one-piece mechanism, the distance between the axles and the wheel spacing are in line with the original.

APS Factory Jaeger-LeCoultre Master Ultra Thin iki buçuk ibreli klasik saat 39 mm işçilik incelemesi - Arka Kapak ve Mekanizma Detayı
APS Factory Jaeger-LeCoultre Master Ultra Thin iki buçuk ibreli klasik saat 39 mm işçilik incelemesi - Bilezik, Toka ve Klips Mekanizması
APS Factory Jaeger-LeCoultre Master Ultra Thin iki buçuk ibreli klasik saat 39 mm işçilik incelemesi - Makro Kadran ve İndeks İşçiliği
APS Factory Jaeger-LeCoultre Master Ultra Thin iki buçuk ibreli klasik saat 39 mm işçilik incelemesi - Klips Kilidi ve Lazer Damgalar
APS Factory Jaeger-LeCoultre Master Ultra Thin iki buçuk ibreli klasik saat 39 mm işçilik incelemesi - Bilekte Duruş ve Kasa Orantısı

When you look at the general appearance of the APS, it is similar to the original, and so is its function. In the new model, the hour markers are slightly thinner and longer, as well as slightly brighter. These are very well done. There is also a slight radial texture on the dial; not a pure white surface, but a silver surface; A panel with a slight fluorescent tint. Overall a pretty good glass. There is also no blue coating; This is all done right. Overall, this watch is simple but not basic; Now we have another truly stylish daily watch to buy.
I hope this article was useful to you. I will share more detailed teardowns, live footage reviews and real-replica comparisons in the future.

Saat Dedektifi Expert Score

Model: Jaeger-LeCoultre Super Clone · 1:1 Super Clone Master
9.4/10
Kasa Geometrisi ve Metalurji9.5 / 10
Kadran Detayları ve İndeksler9.4 / 10
Mekanizma Hassasiyeti ve Rezerv9.3 / 10
Bilezik, Toka ve Tolerans9.4 / 10
4.6

User Rating

41 people rated · Saat Dedektifi Verified Score

Rate this model:

Conclusion & Detective Verdict

As demonstrated in our technical review of the Jaeger-LeCoultre Super Clone model; the optical tolerances of the case, dial typography, and stable operating performance of the movement elevate this model to the pinnacle of its category. With its wrist ergonomics, premium material quality, and micron-level finishing precision, it stands as a flawless choice for collectors.


Frequently Asked Questions (FAQ)

Which mechanism is used in the Jaeger-LeCoultre Super Clone model?

In this model, the model's high stability integrated caliber or Swiss-norm Clone movement is used; Deviation tolerance is in the range of 2-5 seconds per day.

What is the case material and stainless steel quality?

Made from solid 904L/316L stainless steel with high corrosion resistance; It exactly reflects the original feeling of weight and texture.

Is there AR coating on the sapphire glass surface?

Yes. There is a colorless double-sided AR coating on the scratch-resistant sapphire crystal glass surface to prevent glare and reflection.

How is the waterproof performance?

With its seal-tested crown system, it is fully resistant to pressure up to 50-100 meters and daily water contact.

Does Saat Dedektifi have expertise assurance?

All technical controls, timegrapher measurements and case tolerances received full marks from Saat Detective expertise standards.


Share:XTelegram