How is the TZ Audemars Piguet Royal Oak series table clock setting method?

The Audemars Piguet Royal Oak model is produced by the leading Super Clone manufacturer workshops with a solid 316L stainless steel case, standard case diameter and high-precision automatic Super Clone mechanism architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Usage Method

➀ Setting the time: First, find the button at position 9 on the back, then hold the button with your thumb and forefinger and turn it to set it to the current time.

➁ Setting the alarm: First, find the switch corresponding to position 3 on the back, then move the alarm hand (the smallest hand on the dial) to the hour position you want it to sound (turn it by holding the button with your thumb and index finger), finally turn the switch corresponding to position 2 on the back to the ON position (turn it to OFF to turn off the alarm). When the hour hand coincides with the alarm hand, an alarm sound is heard from the speaker on the back corresponding to the 8 position.

➂ Battery replacement: First remove the rear screws corresponding to positions 10 and 2 with the appropriate size screwdriver (other screws are for decoration), then remove the bottom cover ring; then remove the bottom cover by removing the remaining two screws on the bottom cover with a smaller screwdriver. Then, remove the safety cover with the letter B on it with a coin or key and replace the battery. After replacement, reinstall all parts in reverse order.

➃ Standing on its own: Use your finger to open the gap at the rear edge corresponding to position 6; so you can open the support leg.

I hope this article was useful to you. I will share more detailed disassembly, real shot review and real-replica comparison in the future.

TZ Factory Audemars Piguet Royal Oak series 15710 model table clock real shot HD detail photos