How to distinguish real from replica in KZ Factory Omega De Ville Orbis women's special edition?

The Omega Wristwatch model is produced by the leading Super Clone manufacturer workshops with a solid 316L stainless steel case, standard case diameter and high-precision automatic Super Clone mechanism architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

General appearance comparison of the watch

KZ's Omega Orbis was produced from top to bottom by dismantling the shop original; Therefore, there is no difference between the two watches in terms of general appearance and form. The case and strap of both watches are made of the commonly used 316L stainless steel. The point worth underlining here is this: The KZ version uses the 1376 co-axial quartz movement, which is exactly the same as the original; Be careful, it's exactly the same; It is not a mechanism that has been changed later. (I can't help but mention this: The mechanism of Omega's XXX quartz watch is actually accessible; of course, it requires special channels.)

The biggest challenge of this watch is none other than the dial surface. Blue is the most difficult color to adjust; If a slightly different tone were mixed into blue, which is one of the three primary colors, the result would be ruined. The blue of the KZ is very close to the clear dark blue tone of the original.

Complex Orbis teddy bears are intertwined; But due to its emotional connection, KZ Factory spent a considerable amount of effort and expense to reproduce the teddy bears exactly. The KZ version is the closest Orbis to the original currently on the market; the undisputed first. Other sloppy factories couldn't even get the shape of the bear right in the name of 'creativity', let alone the location of the bears.

Belt comparison

The belt of the KZ version was produced by dismantling each small piece of the original belt one by one and then modeling it with 3D scanning; Even the size of each hole is exactly the same, and it has finally reached a level where it can be interchanged with the original belt. The three-dimensional engraving work of the CNC Omega logo on the buckle has also been done very carefully: the recessed parts are matte, the protruding surfaces are polished. The one-way snap buckle is also very practical in use.

Side comparison

The details all over the strap are processed very successfully; the engraved writings are clear where they should be clear, without the slightest omission; Everything that needs to be is in place, it does not look eye-catching like the small factories on the market. In addition, the processing of the buckle has gone through many difficulties and has reached an extremely high level that provides 100% accuracy in opening the buckle. The whole watch is made of high quality 316L stainless steel; It fits the skin, does not cause allergies, has high hardness, is resistant to abrasion and scratching, and its processing is smooth and rounded; You don't want to take it off, right?

The case of the KZ version is just like the original; The layers are distinct and their connections fit tightly. The classic De Ville style case design is plump and rounded; It fits in the hand and does not sting. Since it carries an ultra-thin quartz movement, the case thickness was kept at just over 6 mm; Extremely light on the wrist. Undoubtedly the favorite of women.

Comparison of major measurement data

The main data of the two watches overlap with each other. The case diameter has been tested and adjusted many times, reaching 27.4 millimeters, which is exactly the same as the official size; In terms of appearance, it can be said that there is no problem in replacing all the parts with the original. As for the difference in thickness of 0.2 millimeters, this is due to the pressing of the glass; This point is relatively difficult to control, but the glass can actually be ignored, no need to take it into account.

Case back comparison

The case back of the KZ version is made with polished outer ring and brushed workmanship on the inside; The brushed section in the middle is slightly raised and engraved with the Orbis teddy bear emblem and the OMEGA logo. At the bottom, there is an 8-digit independent serial number specific to each watch. As can be seen from the photos, the engraving workmanship of the original is clearer; After all, the original, of course, cannot match the fineness of the nano-engraving devices, but KZ has also achieved a similarity of over 90 percent. (The serial number of the original has been censored.)

This watch includes the Omega 1376 quartz movement.

KZ undoubtedly used the same craftsmanship as the original version; The necessary engravings are also complete. However, the original is still the original; Since the fineness of the engraving devices has reached the nano level, the engraving workmanship of the original is clearer, but KZ is not bad either, achieving a similarity of over 90 percent. The discrepancy in side thickness is also due to the fact that the KZ is 0.2 millimeters thicker than the original; This 0.2 millimeter is caused by the pressing of the glass and is very difficult to control. Of course, 0.2 millimeters is not noticeable to the naked eye, so there is no need to worry. More importantly, it uses the 1376 co-axial quartz movement, which is exactly the same as the original; Be careful, it's exactly the same; It is not a mechanism that has been changed later. Looks like KZ is actually pretty ambitious. According to KZ, Omega's XXX quartz movement is accessible, but special channels are required.

The blue dial with sunburst work is decorated with overlapping Omega teddy bear patterns. In addition to the polished, arched curved Roman numerals, there are also eight diamond hour markers and rhodium-plated hour and minute hands.

27.4 millimeter women's watch

Since 2011, Omega has been collaborating with the international organization Orbis to deliver high-standard eye care services to people in remote parts of the world. Omega also gifts each little patient with a cute teddy bear. Teddy bear is not just a friend who helps doctors explain and show patients the surgery process; It also provides solace to children during the life-changing treatment process.

Omega teddy bear gift along with the watch to those who purchase KZ Orbis

* In order to offer Omega fans as in-depth a comparative review as possible, this comparison was made under specific photographic lights; The blue reflected by the sunburst pattern may show different color tone changes in different light environments.

Finally, it should be noted that this time, in addition to offering such a dazzling watch product, KZ Omega Orbis also includes the official souvenir card, official Orbis bag and a tiny, cute Orbis teddy bear along with the watch. From this care, we can see that KZ is working wholeheartedly; If you are going to do it, do your best mentality. It is admirable.

If you read until the end, I hope this article was useful to you. We will share more detailed reviews in the coming days.