Audemars Piguet Royal Oak Offshore 26412PT Review

Audemars Piguet Royal Oak Offshore 26412PT model is produced by the leading Super Clone manufacturer workshops with an 18K thick gold-plated case, 44 mm diameter and 7750 automatic chronograph movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

First, let's look at its general dimensions: diameter 44 mm, thickness 16 mm. In terms of thickness, it is about 2 mm thicker than the original, but the same size. The entire case is made of 316 stainless steel; In the original, PT950 platinum material is used here. There is a difference at this point, but in terms of overall color tone it's okay. For those who want the exact same material as the original, it can also be gold plated; so it looks the same as the original material.

Are the ear pods of the JF Factory Audemars Piguet 26412 movable?

These ear pods at the connection point between the strap and the case are also compatible with the original. It can also move, it's just that the range of motion is not as wide as the original. In previous versions these links were fixed; This time it has been changed. Thus, it provides a more comfortable wearing experience for those with thin wrists.

There is a stainless steel bezel on the front; The overall brushed workmanship is quite fine. There is a date window at 3 o'clock, it also has a magnifying glass and is coated in blue. The size of the date digits is the same as the original, and the background color of the date also matches the original. There is a small seconds dial at 12 o'clock and it normally runs continuously. There is a chronograph minute counter at 9 o'clock and a chronograph dial at 6 o'clock. The general layout of the dial is exactly in line with the original.

There is a chronograph start-stop button in the upper right corner of the JF Factory Audemars Piguet. In the middle is the screw-down crown; The material also matches the original. The texture and size of the replica watch are the same as the original. There is a chronograph reset button in the lower right corner. When you press the button on top, the chronograph starts, when you want to stop it, you press the button, then just press the reset button. It is not difficult to use in general.

The strap of Audemars Piguet 26412 has a crocodile pattern printed on Italian calf leather. In the original, crocodile skin is used; If you have the opportunity, you can apply for an upgrade to crocodile skin, then the texture feeling will be better. The buckle is a classic, simple metal pin buckle. The brushed workmanship on the surface of the replica watch is quite fine; At the same time, the AP engraving on the buckle is also very deep. There is also engraving and coding on the back.

As for the case back of the JF Factory Audemars Piguet, a transparent design is used here. The engravings on the edge of the case back are quite clear and distinct; Details such as coding marks on the edge are also available. The entire structure and operation of the movement can be seen very clearly through the sapphire glass.
As for the movement, JF Factory has replicated the original's self-produced 3126 caliber using the Shanghai 7750 movement. By installing an additional bridge plate, the same appearance as the original was achieved. Of course, one disadvantage of adding a bridge plate is that the thickness of the mechanism increases. That's why when I just measured the watch came out 2mm thicker than the original.

The general structure of the mechanism is almost the same as the original. Only the balance position is slightly shifted compared to the original. The processing quality of the mechanism is also very high, it is very clean. The color of the pigeon blood red stones is also matched to the original. In previous versions, this place was purple.

Finally, its evaluation: From the brief review above, we understand that the JF Factory Audemars Piguet 26412PT Royal Oak Offshore series replica watch is different from the original in terms of materials. In terms of thickness, it is slightly thicker, about 2 mm; Other than that, there isn't much of a problem. Its functions are exactly the same as the original. Therefore, it is quite logical to buy it, the pleasure of using it is very high!

We've come this far. I hope this article was useful to you. We will share more detailed parts disassembly, real shot review and real-replica comparison in the future.