Can the GF Factory Franck Muller 8880 men's watch be recognized as fake at a glance?

Franck Muller Wristwatch 8880 model is produced by the leading Super Clone manufacturer workshops with a solid stainless steel case, standard case diameter and ETA 2824-2 caliber architecture in accordance with Swiss norms. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Clock diameter 39.5 X 55.3 mm; This size is suitable for the usage habits of most watch enthusiasts. The overall watch has an oval feel and fits the wrist very well. Additionally, sapphire crystal was used in the glass; Thanks to the sapphire glass, the image remains extremely clear in long-term use and there will be no scratching problems in the future.

Can GF Factory Franck Muller 8880 be detected as a fake at a glance?

The workmanship and details on this watch are quite spot on; In this way, the problem of misunderstanding the entire watch at a glance has been overcome. The brightness of the imported 316 stainless steel case is the same as the original; The subtle sunburst sunray pattern and large, exaggerated numbers on the dial are also indistinguishable from the original.

When viewed from the side, it can be seen that the GF Factory case has an arch-shaped curve like the original; The curve of the sapphire glass is very distinct and the body shape of the case is completely identical. The case back cover is made with a tight combination, leaving no gaps, as in the original, which shows the mastery of the workmanship. The engravings are bright as in the original; Since the original watch is a little old, the engravings were filled with dirt and therefore the inscriptions appeared black.

The patterns on the GF's white sunburst dial are extremely subtle; The blue steel hour and minute hands, processed with quenching technique, are as fascinating as the original. Since the date magnifier of the original is lost during the molding stage, there is no magnification effect on the date numbers.

GF uses the domestically produced 2824 movement; The original has the ETA 2892A2 movement. GF's choice of the 2824 movement is due to stability concerns; After all, there is a common problem with locally produced 2892 movements such as the hour and minute hands getting stuck, so using 2824 movements reduces the malfunction rate. The inner body of the case is also processed with a ray pattern, just like the original, which reveals the care taken.

A good replica requires attention to detail. Even on the invisible inner surface of the back cover, GF has engraved a fish scale pattern just like the original and completed it very finely. GF's winding crown is no different from the original in terms of size and logo, it is impossible to distinguish it; Only the winding shaft of the original 2892 movement is longer than the winding shaft of GF's 2824 movement. When we remove the dial surface, we can compare that the entire dial font is exactly the same, and the thickness and size are exactly the same; The dial surface of the original was damaged in some places during the molding process and was slightly yellowed by oxidation.

GF's buckle is made almost perfectly. Generally, the inner surface of the buckles of imitation watches is not processed and the distinction between real and replica can be made from this point; But GF has even processed the inner surface of the buckle, it is very difficult to distinguish it from the real. The overall watch has overcome the problem of being misunderstood at a glance compared to the original; Watch lovers who like it can buy it with peace of mind!