Real Replica Comparison V6 Factory Rolex Black Submariner 3135 Movement Original

The Rolex Submariner model is produced by VS Factory with a high-tech ceramic case, standard case diameter and high-precision automatic Super Clone movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

How is the workmanship of the V6F Rolex black Submariner 3135 movement? Is it worth buying? Is it the same as VS?

V6-F SUB Rolex Submariner 126610LN comes with a completely new engine: the specially developed caliber 3135. Sensitivity has been pushed forward once again in terms of stability and appearance.

3135 movement comparison

V6-F's specially developed brand new CAL.3135 movement surpasses all existing movements on the market in terms of appearance; In terms of stability, it is superior to other 3135 movements on the market.

Bezel markers comparison

In the GEN original, the engraving on the ceramic bezel is clean and clear; The lines are also extremely fluid.

V6-F has reached the same level as the original, whether in font or thickness. The engraving depth is also very well adjusted. The matte textured silver colored base is also the same as the original.

In Market 1, the engraving depth of the marks is somewhat shallow.

The workmanship in Market 2 is quite crude; curved corner transitions are not smooth. The font is also slightly different from the original.

Lume dot comparison on bezel

V6-F: The color of V6's lume dot is clear and transparent; The color of the metal housing is also relatively brighter.

In market version 1, the depression at the lume edge is evident; The edge of the lume point has a rough feeling, and the edge of the metal housing is thinner.

In market version 2, the surface of the lume dot is not smooth, the depression on the edge is obvious, and the color is a little green.

Cyclops magnifier comparison

The sapphire glass of the GEN original emits a slight blue glow; It looks quite nice.

The blue glow of the V6-F's magnifying sapphire glass is very close to the original; The appearance is also extremely nice.

In Market 1, the magnifier's blue glow is very faint; Almost no blue shimmer is felt. Moreover, the angle of refraction of blue light is reversed, which looks very strange.

In Market 2, the magnifying glass's blue glow tinges with purple; The difference between it and the original is quite big.

Laser engraved small crown logo comparison

When GEN is magnified 20 times, the form of the original crown is still complete and extremely clear; You can feel each little dot forming the body of the crown.

V6-F achieved this result, which was not easy at all, after a lot of effort; The number of dots and shape of the crown remain consistent with the original, even when enlarged to this extent.

In Market 1, the laser dots of the crown are a little scattered and the shape of the crown is also slightly distorted.

In Market 2, the crown is too low; The shape is… well, a little blurry.

Internal reflection comparison

V6-F: To be honest, there are flaws in a few products; but overall, the V6's font effect is still a step ahead.

In Market 1, the font is hollow; The similarity is extremely low.

In Market 2, the logo is misshapen; The font is also very different.

Print text comparison

V6-F: As can be seen from the comparison image, V6 is the closest to the original, whether in logo or font.

The font at the location indicated by the red arrow in Market 1 is thinner; There is no distinction between thick and thin in the printing of the bottom four rows of text, and the meticulousness of detail is extremely low.

In Market 2, the lines of the logo remained thin; The 'ROLEX' font is thin, while the font for the bottom three rows of small text is bold.

Looking at the comparison results, the one closest to the original in print is the V6-F, which came later.

Hour markers comparison

In the GEN original, the chamfering workmanship of the hour marker pins is extremely smooth; The lume surface is smooth and clear.

V6-F: Thanks to fine machining + chamfering + automatic lume filling, the appearance of each hour marker pin is flawless.

There is no chamfering on the triangular pin in Market 1; The slot edge of the round pin is too thick.

In Market 2, the edge of the triangle pin is too rough; The lume filling of the round pin is overfull, the texture feeling is mediocre.

Thickness comparison

The thickness of the V6 Factory version is the same as the original.

Ear (lug) comparison

In the GEN original, there is a one-step level difference between the first link of the steel bracelet and the case lug; this enhances the sense of visual layering.

V6F: In the V6 Factory version, the level difference between the first ring and the case lug is very close to the original.

Market 1: First ring flush with case lug; This is wrong practice.

Market 2: The arc of the first ring is wrong; The upper part of the ring is too high, the curve at the lower part is too narrow, and it looks incompatible with the case lug.

Buckle comparison

First of all, when you look from the front, the quality feeling of a few factories is not bad, but when you zoom in a little, you can see the difference between the products.

You can directly feel that the thickness of the crown logo on V6-F is almost no different from the original; The workmanship of the lower part of the logo is extremely clean and smooth, there are no burrs on the edges of the logo, it is quite smooth.

Market 1: The oval shape is not smooth, the logo lines on the arrow part are thin, the bottom of the circle is uneven, the bottom workmanship of the round bead part is very poor and the bottom surface is rough.

Market 2: The matchstick part is too thick, the logo lines are noticeably rough, the round bead on the top is also very different from the original.

Pointer head comparison

Starting in 2019, Rolex upgraded the capital of the Submariner hands to a cylindrical form. This form has higher aesthetics and production difficulties. Currently, only the V6-F can make the one closest to the original on the market.

V6-F is externally round, three-dimensional and plump; It matches the original exactly, there is basically no difference.

Market version 1: Mushroom-headed pointer head, lack of sense of three-dimensionality.

Market version 2: Mushroom-headed pointer cap and external form are seriously deteriorated.

Should you buy V6 Factory or VS Factory for Rolex Submariner (black)?

Summary: VS Factory Submariner (black) received very good feedback in the market, they have made its mechanism really carefully. This time, we can say that the V6 Factory Submariner (black) is basically VS Factory with only the packaging material changed; It is difficult to tell you which factory is better since the price is the same, they are both the same anyway. However, the first batch of V6 Factory products are given a rubber strap as a gift, which makes it relatively more affordable; It is not known whether it will happen in the next batches. Anyway, I'll leave it here for now. Interested friends can consult Mr. I hope Bey's article helps you.

V6 Factory Rolex 3135 Submariner (black) high resolution real shot photos