Clean Rolex Coke Bezel Wristwatch Detailed Review

The Rolex Wristwatch model is produced by Clean Factory with a solid 904L stainless steel case, 40 mm diameter and a high-precision automatic Super Clone movement architecture. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

Case and Body Workmanship

Before N Factory closed, it was the one that made cola dotted the best; The color of the ceramic bezel was also closest to the original. Since N Factory closed, there hasn't been a truly dazzling GMT red-blue coke bezel product. Many watch enthusiasts don't understand why it's so difficult to make a starch bezel when it's waterproof and the Daytona can be made so successfully. In fact, the most difficult part of the cola bezel is the ceramic bezel ring and the red-blue transition point. This ceramic bezel ring is the most difficult part to make; It is very difficult to match the color and many factories cannot produce it in accordance with the original. In addition, the firing difficulty of the ceramic bezel is very high. But Clean did it, and did it in the best way possible and closest to the original; He even connected the transition point perfectly, without any gaps. This is completely true to the original. Therefore, no one needs to worry about the ceramic bezel anymore.

The diameter of the clock is 40 mm. The model is made entirely of 904 stainless steel; It has sapphire glass, dual time zone function and a magnifying glass over the date window at position 3. The overall look again reflects Rolex's prominent style. The black dial is made of enamel; The advantage of enamel is that it makes the black dial look brighter and deeper. The hour markers resemble those of the waterproof and have rounded corners; The workmanship of the dial is very meticulous. The lume powder on the Mercedes hour and minute hands is applied smoothly, and the text printing on the date window is three-dimensional and elegant.

The color of the ceramic bezel is very close to the original. Although it is not possible to be 100 percent identical to the original, this ceramic bezel is 95 percent intact; Unlike other factories, it is not obvious at first glance that it is fake. Additionally, the marker fillings are quite full and smooth, and the hour markers are properly aligned; This is completely in line with the original. The red-blue transition point is also joined without gaps; In this respect it is the same as the original.

Dial and Hand Details

The workmanship of the dial surface is exactly the same as the original; All the necessary engravings are present, and the font is the same as the original. The corner edges of the cue sticks are machined, the lume filling is quite full. A solid axis, which is exactly the same as the original, was used. Lume is filled on the hour and minute hands; The processing and polishing workmanship of the hour and minute hands is fine and meticulous, not rough like other factories. We can say that the general workmanship and parts of the dial surface are almost the same as the original.

The case is made of 904 stainless steel. A brushed finish has been applied to the side surface of the case; The case arch is held in place, the lugs are perfectly curved and chamfered. The serrations on the side of the bezel are processed properly, their depth is appropriate and the touch is smooth. The screw-down crown provides extremely strong water resistance; The logo engraving on the crown is clearly visible, gives a three-dimensional feeling, and is dimensionally accurate.

Case back with closed back. 3186 was used as the mechanism; This mechanism is very sensitive and stable, no changes have been made to it. The functions of this mechanism are the same as the original; The date is adjusted by the quick setting method, which is completely in line with the original. N Factory also used this movement before, but N Factory covered the engraving of the 3186 with a metal piece and turned it into the 3285 movement. In fact, as Hongjie, we think that Clean factory has done a very good job in this regard; because a modified mechanism cannot be absolutely better than the original. Of course, there are some mechanisms that have good replacement techniques, and there is no problem with them. But most Rolexes have a closed case back; Who would open the case out of the blue to see the mechanism? The main thing is the stable and precise operation of the mechanism.

Strap, Buckle and Comfort

There are two types of straps: five-link bracelet and Oyster bracelet options that appeal to different tastes. The stainless steel bracelet has a five-knuckle structure and each knuckle is machined. It consists of 904L Oyster steel, Jubilee type five-jointed solid links; The surface of the outer pods is matte, and the edges are polished. The Oyster security buckle can be lengthened or shortened, which is extremely practical. The workmanship of the buckle is very fine; Information such as the logo and text engraved on it can be seen clearly. This sophistication in the functional structure reveals the fine and high-precision production workmanship of the Clean factory.

The lume effect is exactly the same as the original.

Although the production of the Rolex GMT red-blue star bezel is very difficult, after many attempts, it has now reached a very perfect point and it is not obvious that it is fake at first glance. Moreover, the popularity of the cola bezel watch never decreases and it is very difficult to find it. The reason for this is two points: The first is the eye-catchingness of the star bezel. The red-blue bezel color harmony is extremely striking, young and stylish; Moreover, it does not become obsolete easily. That's why it attracts many watch enthusiasts who love fashion and can carry vibrant color harmonies.