2019 debut XF Factory IWC Pilot Bronze Spitfire IW326802 production workmanship detailed review

The IWC Pilot model is produced by the leading Super Clone manufacturer workshops with a special alloy bronze case, standard case diameter and ETA 2824-2 caliber architecture in accordance with Swiss norms. It is among the most successful 1:1 super clone watch reviews on the market, with its sapphire crystal AR coating glass, original case tolerances and detailed workmanship.

One: The ancestor of bronze, with many years of production experience and technology that dominates the oxidation rules of bronze;

Two: Strict quality control standards, stable mechanism, no rotor chatter;

Three: How do you experience the oxidizing charm of this bronze Spitfire?

Four: How does it differ from other small workshop versions on the market?

(One) XF – Ancestor of Bronze

The unique appeal of the bronze case lies in the fact that it is much more playable than other metal cases. The copper component in bronze reacts with air and creates an oxidizing effect. Thanks to this change, each person who wears a bronze watch experiences different oxidation effects on his watch depending on the different environments he lives in and leaves his own special marks.

A few years ago, Panerai was the first brand to release the Luminor Submersible 1950 PAM382 and created a bronze wind in the watch world. XF's story with bronze started with Panerai PAM382. Then XF; PAM507, PAM671; Zenith's bronze Pilot, bronze knight, bronze Pilot with blue dial; He brought out Tudor's red copper flower and blue copper flower. As can be seen from the recently updated and released Tudor blue copper flower, XF never stopped in its bronze material production craftsmanship, constantly researching, and only then could it achieve a relatively stable oxidation effect like that of today's IWC Bronze Spitfire. This is something small workshops cannot do.

Case and Body Workmanship

We know that the production and processing of the bronze case is not much different from the steel case in terms of difficulty; As long as the raw material contains copper, it will oxidize. But is this the oxidation we are looking for?

The real challenge is how to oxidize the bronze casing at the rate we want and with the effect we want. XF has constantly researched this challenge, constantly accumulating experience. In the end, the IWC Bronze Spitfire achieved the oxidation effect closest to the original. You can compare it with small workshop versions on the market; In small workshop versions, you can easily notice that the oxidation color is uneven, darkening, and even rust in the form of black spots easily forms.

(Two) Strict quality control standards, stable mechanism, no rotor chatter

1: All XF production IWC Bronze Spitfire watches are assembled as standard in the assembly factory with brand assembly competence; This ensures that the time display of each IWC Bronze Spitfire is stable.

2: Each IWC Bronze Spitfire watch from XF passes 100% high-intensity vacuum water testing. As long as the XF version is an IWC Bronze Spitfire, you don't have to worry about waterproofing.

3: Appearance and powder quality control on par with domestic brands. If a problem is detected, the watch will not be released. We definitely do not ship like small workshops in the market, like fishing in muddy water even though there are quality problems and defects. That's why it's so important to choose a reliable version.

4: Every IWC Bronze Spitfire watch from XF is 100% time display tested to Swiss standards. Each Bronze Spitfire is ensured that its daily margin of error remains within “±” 15 seconds. As long as the watch is not dropped or bumped, you do not need to worry about time display error. Those old, weak and problematic mechanisms are eliminated at this stage. Small workshops, on the other hand, involve them and dispatch them, even if they know there is a problem.

Movement and Caliber Performance

5: The Seagull 2824 mechanism, which is the most common and stable in the country, was used. The XF factory considered Seagull's 2892, 2836, 2824, Citizen's 9015 and many more movements for this IWC Bronze Spitfire. After considering all the factors, he decided to use the Seagull 2824 movement. The original carries IWC's own 32110 movement; No matter which movement is used, the appearance of the movement does not match, it is already a closed case back model. That's why we chose the one with the most stable movement quality. Citizen 9015's rotor makes a rattling noise while rotating; This is the common flaw of that mechanism. No one wants to hear the rotor rattle every time they wave their arm. That's why it was finally decided to use the Seagull 2824 movement, which everyone found most suitable.

(Three) How do you experience the oxidizing charm of this bronze Spitfire?

Tools included with the XF IWC Bronze Spitfire

1. Belt remover — belt removal tool;

The calfskin strap deteriorates easily and creates a bad odor when it comes into contact with water; so when you want to return the Bronze Spitfire to its original condition, please remove the strap using the strap remover that comes with the watch. Remove the case body and buckle. The tool is sharp, please be careful when using it.

2. Eraser — light repair tool

When we touch the case with sweat on our fingers, oxidation or unpleasant marks in the form of fingerprints may occur on the case. Then you can easily remove the marks using the eraser.

3. Ketchup — the complete makeover tool

When you think of loving the new and leaving the old (joking aside), you can apply ketchup to your heart's content on the case body and the buckle. After 3 minutes, you can regain the feeling of the first day. Of course, there are many more renewal methods; We tried them all one by one and decided that ketchup is more suitable for you. Practical and effortless. (Compared to vinegar)

The copper component in bronze reacts with air and creates an oxidizing effect. The two watches in the photo are from the same lot; The one on the right is the watch that just got a makeover, complete with ketchup. After the refurbishment, the case body exudes a fresh rose gold color; It is very enjoyable to look at, especially for obsessed people like us. This process of oxidation and recycling is the charm that bronze offers us.

Thanks to oxidation, each person who wears a bronze watch obtains different oxidation marks on his watch depending on the different environments he lives in and leaves his own special marks.

Returning gives you a brand new start. Your favorite watch will be like the first day again and will give you a good mood.

(Four) How does it differ from other small workshop versions on the market?

1. Mechanism, as I mentioned above. The mechanism of the XF Bronze Spitfire is stable and the rotation sound of its rotor is quiet. If you hear a clicking sound when you put your Bronze Spitfire on your arm and shake it, you need to pay attention.

2. Looking at things like case lines are very difficult for most people to distinguish. But does the case edge sting the hand? Everyone can feel it when they hold it and touch it. Small workshops do not pay attention to these details, the case edge becomes painful in the hand.

3. The XF Bronze Spitfire has text and logo on its rotor. In small workshops the rotor is usually empty.

4. When you purchase the XF Bronze Spitfire, the IWC Bronze Spitfire experience package is given as a gift along with the watch.

Summary: On the outside, this XF Factory IWC Spitfire Pilot automatic wristwatch continues the simple dashboard design of the classic Mark XI navigation watch; In material selection, it uses bronze material, which is very popular right now. Did you feel a little lost when you came this far?

Thank you for watching.[watch enthusiast] is an expert who knows which watch is right for you. Someone who tells the truth and serves with his conscience. Living in piles of hours every day; An account with more high-resolution real shot photos, more watch information, more real-replica comparisons to help you choose a watch. Follow brother to share more watch information; Enjoy top-end watches at the lowest price. All you have to do is find the brother in the watch business.